the installation steps of the ordering light box summarized by minoxin advertising engineering department are as follows:

1. First, determine the installation location of the ordering light box, and determine the installation method according to the actual situation and the variety of the light box.

2. Measurement size: Determine the fixing point for installing the A-la-carte light box according to the position of the mounting hole on the back of the A-la-carte light box or the actual size on site.

3. Fixed ordering light box:

A) The wall of the site is aluminum-plastic board, wood board, iron plate, etc., which can be directly fixed with self-tapping screws;

B) The site wall is made of cement or brick wall, which can be punched with an impact drill first and then fixed with expansion screws;

C) The on-site wall is made of ceramic tile, marble, glass, etc. First, use a glass drill to drill through the surface, then drill expansion screw holes, and then fix the light box or use glue.

D) For the light box that needs to be hoisted or hung on site, after selecting the installation position, determine the fixing point for installing the light box according to the actual size of the installation hole of the light box, and then install the hanger and connect the ground wire.