Kitchen decoration is an important part of the decoration process, and the kitchen decoration will involve the installation of kitchen utensils.
Kitchen utensils mainly include cabinets, sinks, faucets, range hoods and cookers. Strong professional skills in kitchen utensils installation, and its installation procedures are generally: wall and ground base treatment, product acceptance, cabinet installation, water supply and drainage, supporting electrical installation, testing and adjustment.
1. The upper cabinet of the cabinet shall be fixed in different ways according to different walls. The length of the backing hanging plate is about the length of the upper cabinet minus 10 cm. Two reinforcing nails are used for the length of the backing hanging plate less than 50 cm, and three reinforcing nails are used for the length of the backing hanging plate less than 80 cm. The length of reinforcement nail should not be shorter than 5cm. When installing, first adjust the level of the cabinet, and then adjust the hinges to ensure the balance and vertical of the door; The two groups are connected to the cabinet, and the screws should be removed and connected with wooden screws. The cabinets of the two upper cabinets should be horizontal and vertical, and the gaps of the door leaves should be symmetrical; The height of the cabinet from the ground should be greater than1.5m..
2. Adjust the horizontal knob when installing the lower cabinet, and the table top and front of each cabinet should be on a horizontal plane; When connecting two cabinets, use wooden screws. In the case of pipes, valves, etc. The back should be punched and scribed on the back plate to avoid related equipment, and there should be no sawtooth phenomenon at the hole edge.
3. When installing the stainless steel sink, line and slot the table according to the model and size of the sink. When the sink is connected to the countertop, it should be clamped and leveled with the prepared hanging screws and sealed with sealant. The connection gaps between the remaining panels of the sink should be symmetrical, and there should be no water seepage.
4. When installing the faucet, you can directly punch holes in the stainless steel plate or other plates. The installation requirements are firm, and there is no water seepage at the joint.
5. Install the range hood according to the manufacturer's product instructions, so that the dimensions of the upper cabinet and the range hood are coordinated and unified. At present, manufacturers of range hoods can generally install them at home free of charge according to the design.
6. When installing the cooker, choose the appropriate cooker according to the type of gas. During construction, the trachea should be locked to avoid air leakage. After installation, check whether there is air leakage with soap bubbles, and install if there is no air leakage.
For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd