method

1: clean the site and clean the ground. (Note: If there is wax on the ground surface, wax should be removed with wax removal water before cleaning. )

2: Shake the bottle back and forth for several times, and then evenly spray the anti-skid agent on the ground or brush the ground with a sponge, which should be evenly painted. If there is dry surface, it should be moisturized in time.

3: after waiting for 8-15 minutes, wash it once with clear water, and then gently scrub it with a brush or sponge.

4: after the anti-skid treatment is completed, it is naturally dried for 1-2 hours, and if necessary, it is left wet with clear water, and then it is put into use.

5: After the above procedures are completed, you will feel that the anti-skid effect is significantly different from before.

Advantages

1. It can be handled at any user's convenience. Generally, small and medium-sized areas can be completed within a few hours, and the company can operate normally, minimizing the inconvenience.

2. The user only needs to provide the power supply, water source and drain required for treatment.

3. The anti-skid treatment will not affect the beauty and cleaning and maintenance of the original ground.

4. The anti-skid treatment on the ground has obvious effect and long service life.

Some requirements for the follow-up cleaning and maintenance of the ground after anti-skid treatment

In order to maintain the lasting effect of the ground after anti-skid treatment, the follow-up cleaning and maintenance work is extremely important.