Cleaning of pretreatment net:

( 1)

Cut off the power supply and open the access door.

(2)

Pull out the pretreatment net.

(3)

Soak in the cleaning tank for ten minutes, gently clean the oil on the net, and rinse thoroughly with clear water.

(4)

Naturally air-drying the cleaned pretreated net.

(5)

Put the dried pretreatment net back to the original position of the oil fume purifier.

2, electric field cleaning:

( 1)

Cut off the power supply, open the access door and take out the electric field.

(2)

Put the cleaning sheet into the electrode plate and move it from top to bottom beside the electrode plate. Only most of the oil stains on the electrode plate can be cleaned. If it is not clean once, it can be cleaned many times.

(3)

Clean up the scraped oil and rinse it with clean water.

(4)

The cleaned electric field is naturally air-dried.

(5)

Put the dry electric field back to the purifier according to its original position, and close the access door to work again.