Electricity elimination inspection is mainly used to check and test fire-fighting electrical equipment, which is mainly suitable for public places and places where people are concentrated. Discharge detection is a testing qualification officially issued by Beijing Fire Bureau. Appraised by the expert evaluation committee of Beijing Fire Protection Association, it has the unit with technical service quality assurance system for building fire protection facilities detection and electrical fire prevention detection [Consumers Association Zheng Zi (2008) No.090].
Fire safety is an important event in our life, which is related to our property and life safety. Our children have all kinds of fire safety knowledge education since primary school-all units and companies have clear fire safety requirements, must be equipped with certain fire equipment, and must pass the fire safety inspection of the fire management department. Electrical inspection is the fire safety inspection of electrical equipment and fire fighting equipment, so what is the function and significance of electrical inspection?
First of all, the safety of each unit circuit operation can be guaranteed by the power-off inspection. Testing of electrical equipment includes testing of power distribution equipment, distribution box, 1, power distribution equipment 2, distribution box 3, wiring 4, lighting lamps, switches and sockets. For a newly established factory or company, there are many electrical equipment, heavy load and complex lines, which are prone to potential safety hazards. Only by passing the qualified electrical defect elimination inspection. We won't be relieved until we use it.
Secondly, hidden dangers can be found and dealt with in time through electrical defect elimination inspection. Occasionally, I will see which one caught fire because of the aging of the line or the aging of the refrigerator. If we check the power regularly, we can find these problems in time, and we will deal with them in time to avoid fire accidents. In addition, all kinds of fire-fighting equipment will age after a long time and need to be checked, which can be used when necessary. Therefore, there are fire inspection requirements for the fire management departments of all units.
In a word, the role and significance of electronic monitoring is enormous. We shouldn't give up these necessary tests in order to save some money, which will bring hidden dangers to our unit and company. However, when we are looking for a testing company to eliminate electricity, we must find a qualified company recognized by the fire department for testing, so as to ensure the reliability of the test results and the safety of our property. Beijing Fire Protection Network is a professional company engaged in electrical appliances fire prevention, fire facilities inspection and fire maintenance. It is well received by users and is a trustworthy unit, which deserves attention.
Contents of fire electrical inspection
(a) whether the buildings and places have passed the fire control acceptance or fire control completion acceptance for the record according to law, and whether the public gathering places can be put into use and opened after passing the fire control safety inspection;
(two) whether the use of the building or place is consistent with the nature of use determined at the time of fire control acceptance or fire control completion acceptance for the record;
(three) whether the unit has formulated the fire safety system, fire fighting and emergency evacuation plan;
(four) whether the building fire control facilities are regularly inspected, whether the fire control facilities, equipment and fire safety signs are regularly inspected and maintained, and whether they are in good condition and effective;
(five) whether the electrical lines and gas pipelines are regularly maintained and tested;
(six) whether the evacuation passage, exit and fire truck passage are unblocked, whether the fire zone is changed, and whether the fire spacing is occupied;
(seven) whether to organize fire inspection, fire drill and fire safety education and training for employees, and whether the operators of automatic fire control system hold certificates;
(eight) whether the place where inflammable and explosive dangerous goods are produced, stored and operated is located in the same building as the residence;
(nine) whether the place where other articles are produced, stored and managed and the place where they live are located in the same building, and whether they meet the technical standards for fire control;
(ten) other contents that need to be checked according to law.
legal ground
People's Republic of China (PRC) Fire Protection Law (202 1 Revision)
Article 16
Organs, organizations, enterprises, institutions and other units shall perform the following fire safety duties:
(a) at least once a year to conduct a comprehensive inspection of building fire control facilities, to ensure that they are in good condition and effective, inspection records should be complete and accurate and archived for future reference;
Article 27
The product standards of electrical products and gas appliances shall meet the requirements of fire safety. The installation and use of electrical products and gas appliances, as well as the design, laying, maintenance and testing of lines and pipelines, must conform to the technical standards and management regulations for fire control.
Article 34
Fire technical service institutions and employees such as fire product quality certification, fire facilities inspection and fire safety monitoring shall obtain corresponding qualifications and qualifications according to law; In accordance with laws, administrative regulations, national standards, industry standards and practice guidelines, accept the entrustment to provide fire control technical services, and be responsible for the service quality.
Two. Provisions on fire control supervision and inspection (OrderNo. 107 of the Ministry of Public Security)
Article 10 The supervision and spot check on the performance of the statutory fire safety duties of this unit shall check the following contents according to the actual situation of this unit:
(four) whether the fire control facilities, equipment and fire safety signs are regularly maintained, and whether they are in good condition and effective;
(five) whether the electrical lines and gas pipelines are regularly maintained and tested;
Thirty-first public security police stations shall check the following contents when conducting daily fire supervision and inspection of units:
For units with building fire control facilities, the police station should also check whether the unit regularly organizes the maintenance of building fire control facilities.
Conduct daily fire supervision and inspection of residential property service enterprises. In addition to checking items (2) to (4) of the first paragraph of this article, the police station should also check whether the property service enterprise maintains the fire-fighting facilities used in the management area.
Thirty-third public security police station in the daily fire supervision and inspection, found that the inspected unit has one of the following acts, it shall be ordered to make corrections according to law:
(ten) failing to organize the regular maintenance of building fire control facilities.