Shanghai Second-hand Car Trading Market Co., Ltd. was established with the approval of the municipal government in June 2000, and was named the National Second-hand Car Trading Center (Market) with the approval of the former Domestic Trade Bureau.
The market integrates the functions of motor vehicle registration agency, second-hand car detection, evaluation, display, transaction and certification, second-hand car withdrawal, Shanghai C number plate, new car registration, second-hand car auction and so on, providing second-hand car network information services.
For three consecutive years (200 1-2002, 2003-2004, 2005-2006), the market was named as a civilized unit in Shanghai by the municipal government, and was rated as one of the top 50 used car trading markets in China by china automobile dealers association.
How to judge the car condition when buying a car;
First, check the control equipment and control elements. Turn the steering wheel up and down from left to right by hand. If it is loose, the bearing on the upper part of the spindle is really worn. Turn the steering wheel, if the turning clearance is large, it means that the steering wheel is used frequently; Whether the turn signal is on or off is normal.
Whether the horn sound is normal; Whether the wiper is normal and the wiper angle is normal; Whether there is a problem with the function around the seat; Whether the throttle is smooth, not stuck or loose; Whether the clearance during braking is small enough; When the handbrake function is pulled up, is there any gap that can be pulled up? Whether the shift is smooth, whether the bite is obvious, etc.
Secondly, check the signal light on the dashboard. Turn on the button to see whether the light of the oil pressure gauge is normal and whether the oil gauge and water thermometer are working; Start the engine and check whether the indicator lights of the oil pressure gauge and charging meter are black; Pull the damper to see if it is normal.
Third, check whether the engine has abnormal sound; Step on the accelerator pedal and feel whether the sound hits; Observe the color of the exhaust gas. If there is blue smoke or white smoke, there is oil burning.
Fourth, check the engine compartment. Whether there is oil leakage at the air tappet cover and cylinder head; Whether there will be water leakage at the clamp of each part of the water pipe, the joint between the water pump and the radiator, etc. Whether there is brake oil leakage in the brake oil pipe and the lower part of the master cylinder.
Five, check the electrical system. Whether the local connection of each joint is normal; Is the battery expired?
Sixth, check the body chassis. Look at the sheet metal of the car body horizontally to see if there are any traces of repair. Whether there are traces of straightening or welding on the water tank cover and beam; Open the compartment of the trunk to see if it has been burned; Whether the bottom is rusty or leaking; Whether the body rubber leaks or breaks; Whether the chassis bearing beam is bent or welded, etc.