when processing the pendant, you can use the accessory shown below. Of course, this accessory can be cut into small pieces with angle iron and punched.
installation method of display screen 1. installation method of indoor display screen 1) hanging (wall mounting) is suitable for display screens below 11 square meters. The requirement of the wall is a solid wall or a concrete beam at the suspension. Hollow bricks or simple partitions are not suitable for this installation method.
The pendant can be pre-punched, and then the screen can be mounted on the pendant. So you can't see the pendant outside, which is more beautiful. Reasonable and flexible use of pendants can solve many problems.
。
2) Racking is suitable for display screens over 11 square meters, and it is easy to maintain. Other specific requirements are the same as those for wall mounting. Install angle iron bracket or use small channel steel as bracket. Because more expansion bolts are fixed to the wall, it is suitable for installation at a certain distance from the wall.
3) hoisting: it is suitable for display screens below 11 square meters. This installation method must have a place suitable for installation, such as a cross beam or a lintel above. And the screen body generally needs to be added with a back cover, and the small screen can be lifted directly off the upper frame. If it is a relatively large screen hoisting, it can be fixed through the upper and lower frames of the display screen by threading wires, also called through wires and silk sticks. The interior can also be reinforced with angle iron.
4) Mounting: Movable mounting: refers to that the mounting frame is processed separately. Placed on the ground and can be moved. Fixed seat installation: refers to the fixed seat frame connected with the ground or wall.
2. Installation method of outdoor display screen. 2) column type
3) mosaic type 4) roof type The general installation method is to fix the screw on the wall, fix the frame, install the screen in the frame, connect the power cord, arrange the cable and light it up for debugging.
The picture can't be copied. Please search Kirin Electronics and go in and have a look.