Kitchen renovation is completed, to the acceptance of the steps, do not underestimate the kitchen acceptance, although in the renovation we can not insert hands, but acceptance should be treated carefully, if the acceptance is not in place, it will affect the future experience of the use of the kitchen, today's home furnishing network editorial staff will share some of the kitchen renovation acceptance of the matters needing attention, come and take a look at it.

1, evaluate whether there is enough amperage

In the configuration of the kitchen appliances, need to evaluate the total amperage of the appliances is enough, if not enough need to re-distribute power, otherwise it will produce jumping power or wire fire problem.

2, hood ducts to avoid bending more than 2 bends

The hood's ducts will affect the size of the exhaust meter once bent, so if you want to move the kitchen location in the design, you need to pay attention to the exhaust ducts to avoid folding to 2 bends, or let the pipe diameter becomes smaller, will make the efficiency of the exhaust worse.

3, suspended cabinets and the need to leave a gap between the ceiling

Because of the use of suspended cabinets have the limitations of the pendant, the installation of the ceiling will certainly leave a gap, need to do the line board modification.

4, avoid piercing in the beam

Because the beam is a structural body, once randomly pierced will destroy the structure of the house, so the duct path is not randomly pierced beam.

5, the stove electronic switch and stove need to be tightly combined

Electronic switch and stove combination to be sure, to avoid loose situation. In addition, the part of the gas inlet should pay attention to the clamps and the installation of the pipe between the solid, so as not to cause gas leakage.

6, the sink after the drainage test

After the installation is completed, we should go through several tests to see if the drainage function is smooth, using water to confirm the drainage speed, and strictly prohibit washing other items or into the grease stains, etc., so as not to affect the judgment.

7, sink side of the waterproof treatment to be true

Sink and countertops should pay attention to the edge of the waterproof treatment, such as waterproof rubber gasket, waterproof edge such as silicone Likang and so on is true.

8, the old air ducts need to be updated

If the case of reinstallation of the exhaust hood, the old ducts also need to be updated to avoid the accumulation of fumes in the old ducts to form a flammable material.

9, stove installation after the first test burn

Gas stove installation should be completed test burn, adjust the amount of air so that the flame stabilized blue.

Afterwards, it is not regularly check whether the stove fire burns completely, if you find that the yellow flame is too much, please ask the professionals to check and adjust.

10, after the installation of the induction cooker to confirm that it will not shake

Induction cooker without the use of silicon Likang edging, the four sides of the stovetop itself is attached to the foam as a fixed use, directly placed in the countertop opening to confirm that the hand will not shake, this design is convenient to move the gas cooker to facilitate the replacement of batteries inside the gas cooker later.

11, countertop combination to be flat

Whether it is L, some of the font of the kitchen design, the joints and corners of the countertops should pay attention to whether there is a flat connection, and the corner of the head to achieve consistency, so as not to affect the aesthetics.

On how to accept the kitchen decoration is introduced to this side, I believe that after reading the kitchen acceptance specification should have been clear about the relevant matters, if you want to learn more about home furnishing knowledge please pay attention to home furnishing network.

Original link:/news_13516/