A kitchen light how to install
1, the installation of kitchen lights, should take into account the lamps and lanterns easy to clean and electricity safety of these two factors. So the kitchen lighting modeling does not need to be as complex as the living room lamps, should try to be as simple as possible, so that it is more convenient to clean up later.
2, the kitchen is often cooking place, so the kitchen lighting must be sufficient. In addition to the overall lighting, there should be local lighting with wall lamps, worktop pendant lights, cabinet bottom hidden lights and so on. If the kitchen lighting is insufficient, then it will cause inconvenience in the actual cooking work.
3, the installation of kitchen lamps, should be as far away as possible from the stove, so as to avoid direct fumes and vapor with lamps. In addition, kitchen switches and sockets within the parts must choose a good seal, so that you can prevent the occurrence of accidents of leakage.
4, in general, the kitchen ceiling in the center of the installation of a main light, which is to play the overall lighting effect, but also for the kitchen to play a layer of background light. The general installation of the main kitchen light is and the kitchen integrated ceiling is one or the aluminum snap-on panel recessed lights, can make the kitchen look more overall simple, bright.
5, the operating table above the general installation of hanging cabinets, hoods, etc., so it will block the exposure of the kitchen lights, then it is easy to produce a certain impact on the owners of the cooking. So it should be above the operating table, hanging cabinets underneath, install a row of lighting, thus effectively enhancing the efficiency of cooking.
6, in the cabinet, if there is no additional light source, then it will generally be difficult to see the cabinet placed inside the thing, then at night to get something will be extremely inconvenient, so you can add a light source in the cabinet.
7, most of the open kitchen light source is the use of ceiling recessed spotlight form, the number of spotlights arranged in 6-10 or so. Kitchens generally do not use ceiling lights, because ceiling lights do not gather light, only scattered light, so it is not suitable for installation in the kitchen.
8, the kitchen light source should try to choose warm light, so the light is very beautiful. Kitchen temperature is high, so it is suitable for the use of cool-colored lamps and lanterns, and can also create a sense of comfort when the lighting is sufficient.
9, the installation of kitchen lights, not only in the kitchen ceiling in the center of the installation of a lighting source, should be installed in the kitchen by the different lamps and lanterns and light sources composed of multi-level lighting system, thus making the kitchen lighting more complete. Specific lighting methods should be arranged according to the amount of overall space occupied by the kitchen.
10, if the kitchen area of 10 square meters or more, you can use 9 lights, according to the surrounding 8, 1 in the middle of the method of installation. The wattage of each spotlight does not need to be too high, should be prepared to adjust the switch. If the kitchen area between 6-7 square meters, then just use 6 spotlights can be, the layout can be installed according to the 2 horizontal and 3 vertical row method.
Two, how to remove the kitchen lights
1, when the kitchen ceiling is a square plate, first remove the square plate next to the ceiling light.
2, then the blade on the square plate to shake. Then just pull on the side of the board edge that has just been tilted to remove the board.
3.When the ceiling slats are strips, remove the strips on both sides of the strip where the ceiling light is placed, and then replace both the strip and the light bulb.
See, kitchen light installation must pay attention to the method, such as the kitchen light source should try to choose the warmer light, so the light is very beautiful. Kitchen temperature is high, so it is suitable for the use of cool-colored lamps and lanterns, which can also create a sense of comfort when the lighting is sufficient.