Because the position of the cutting head at 0 degree is slightly different from the position when it is rotated to 180 degree, the left and right cutting lines and the left and right cutting lines will not overlap when the glass is cut back and forth. In order to make the left and right cutting lines coincide with the left and right cutting lines, it is necessary to add appropriate motion compensation during cutting. The setting of tool slip is to adjust the compensation distance of left and right cutting lines and left and right cutting lines. ?
Adjustment steps:?
1. First, adjust the left and right cutting lines to make them coincide with the camera reticle. ?
2. Click ""or ""to enter the interface.
The surface is as follows:
3. Suck the glass on the workbench and adjust the display area of the camera. Place glass in the trial cutting area of this interface.
Surface height, feed depth, feed pressure, trial cutting start point and trial cutting end point. ?
4. Set the tool rotation difference:?
A, try to cut a knife on the glass from left to right. At this point, the cutting line should coincide with the camera reticle. Otherwise from 1?
Start over. ?
B. click the button. ?
C. Don't move the workbench at this time, and then try to cut a knife on the glass from right to left. ?
D, use ""to move the workbench in the Y direction, so as to cut the line and the camera?
Cross lines overlap. Note: The slide table of the lens holder is not adjustable. ?
E. click "". ?
F. Click "",and the data next to the button will change. This value is a motion correction value.
Bit mm？
5. test:?
Select the "back and forth cutting" mode in the automatic operation interface, and try to cut a piece of glass to see if the position of the cutting line meets the requirements. If so, the setup process ends. Otherwise, reset. ?
Join VIP and download this article for free.
This article is saved immediately for free.
Millions of quality documents are free and exclusive.
One-click search VIP free documents
Read quality books for free.
share
collect
download
Open the library App to see more similar documents?
20 18 new (sagitar) preferential activities, direct hit the lowest price in the country, only in September, one-click inquiry!
Aika car? advertisement
Relevant recommendation documents
Common problems and solutions in the use of 10 laser knife die-cutting machine
Use the application to view
Automatic cutter switching device of leather cup cutting machine
Use the application to view
Some characteristics of laser cutting machine compared with die cutting
Design of Radioactive Gamma Knife Cutting Machine
Application of automatic tool changing device in leather cup cutting machine
Multi-knife glass cutting machine (LHC-Q420-V 1)
Application introduction of vibrating knife cutting machine
Cutter upper shaping machine and cutter JHA
Special cutting oil for glass multi-knife cutting machine
Special cutting oil for multi-knife glass cutting machine
examination
Baidu Wen Ku
Xiongzhanghao
Baidu Library selects high-quality content.
Baidu search
How much is the profit of Xiao Lv mutton soup? ..
How much is it for venison restaurant to join an acre greenhouse?
Reasons for the decline of the name memory of donkey meat restaurant
Volkswagen's new suv Laos Dahong mahogany furniture
Our advantage is not only the price, but also the good quality of Yasuwei solar film, which has always been the choice of car owners!
Chengda automobile supplies? advertisement
Download the original document for easy reading at any time.
Download document