At present, it takes 200,000-250,000 to invest in a small shoe factory. The main details are as follows: According to the local market analysis, the labor cost for three months is about 80,000, calculated at the highest cost. ; Equipment cost: mainly intelligent cutting machine, sewing machine and gluing machine; The cost of intelligent cutting machine is about 1.2 million yuan, sewing machine is about 20 thousand yuan, and glue coating machine is about 1.0 million yuan; Promotion expenses: mainly selling products. The cost is tentatively set at around 20 thousand. ; The above is the initial cost of the shoe factory. Intelligent cutting machine integrates design, proofing, feeding, cutting, punching, blanking and marking processes, saving labor costs.
Small shoe factory: 25-35W, the more liquidity, the better, affected by the financial crisis.
Now the whole market environment is depressed.
But there are also good ones.
It takes about 30W to build a small shoe factory now.
Of course, the more working capital the better.
To start a shoe-making enterprise, you only need to apply for a personal business license.
I. Documents and certificates to be submitted when applying for industrial and commercial registration of individual industrial and commercial households:
(1) Application Form for Registration of Individual Industrial and Commercial Households signed by the applicant (fill in the Application Registration Form for Individual Industrial and Commercial Households);
(2) Proof of employees (if the employees in this city operate, they must submit the household registration certificate, including the household registration book and ID card, as well as the relevant certificates of retired and other unemployed people; Personnel from other provinces and cities shall submit their ID cards, local temporary residence permits and family planning certificates for women of childbearing age; A photo.
(3) the certificate of business premises;
(4) proof of family members' relationship in the family business;
(5) Notice of name pre-approval;
(6) Relevant special certificates required by laws, regulations and policies.
Two, such as operating pesticides, food, dangerous chemicals, catering, special breeding, cigarettes and other pre-projects, before handling these pre-licenses, you need to register your name, and then apply for a business license with a copy of the pre-license (the original needs to be checked); Shopping malls, hotels and other large business places should also submit fire protection opinions; County (District) personnel should also submit the floating population family planning certificate. All sciences
_
Lien TPE manufacturer
2022-11-0316: 34 Internet creators
watch out for
On Baidu, 360 and other search engines, entering the keyword TPE will pop up many kinds of interrogative words. For example, which country is TPE from? What material is TPE? Where is the TPE manufacturer? How much is TPE a ton? What is the density of TPE? Which is better, TPE or silica gel? Wait a minute ... Bian Xiao will take you through TPE (Thermoplastic Elastomer) today.
What material is TPE?
TPE, also known as thermoplastic elastomer in Chinese, is a soft rubber material, which can be molded by injection molding, extrusion and blow molding, and can be completely bonded with hard plastics such as PP, ABS, PS, PC and PA. TPS is a polystyrene thermoplastic elastomer based on SEBS and SBS. Generally TPE refers to TPS elastomer. An unwritten knowledge is that the elastomer modified by SEBS is called TPE, and the elastomer modified by SBS is called TPR.
TPE is a kind of high elasticity, high strength and high resilience, which has the characteristics of injection molding, environmental protection, non-toxicity and safety. All physical parameters of TPE can be adjusted according to customer's requirements, and it has good coloring, soft touch, weather resistance, fatigue resistance, high temperature resistance, good processability, no need for vulcanization, recycling and reducing cost.
How much is TPE a ton?
Good quality and low price are not necessarily suitable for your products, only the products suitable for you are the TPE materials you want to choose. Buyers can find several TPE manufacturers and shop around. When choosing suppliers, try to choose TPE strength manufacturers. Because of its stable quality, affordable price, complete specifications and more secure after-sales service.
Many netizens consult TPE manufacturers and directly ask how much TPE is a ton. For Bian Xiao, we can only provide some approximate prices, because TPE is a modified material with adjustable physical parameters, and the formula can be customized according to customers' needs. For example, a customer needs a cheaper TPR plastic, about per kilogram 10 yuan, which has low requirements on physical properties and can be injection molded. Our TPR manufacturers reduce the cost by adjusting the formula ratio, and finally meet the price requirements of customers.
Bian Xiao gives an approximate price range here. The general TPE price is 9000~ 15000 yuan/ton. It can be applied to general injection molding and extrusion molding products, such as bicycle handlebars and foot pads. Price of encapsulated TPE: 8500~40000 yuan/ton. It can include PP, ABS, PC, PA, PS, PE and metal. The price of TPE soft plastics is different from that of Bao hard plastics. Smart wearable TPE price: 20,000 ~ 40,000 yuan/ton. TPE price of thread material: 15000~25000 yuan/ton. Generally used as data cable, plug material, earphone cable and so on. Flame retardant TPE price: 30,000 ~ 60,000 yuan/ton. For other special grades, just contact the manufacturer to quote directly and tell the manufacturer the physical performance requirements and test requirements.
What is the density of TPE?
Generally, the density of TPE materials is between 0.9- 1.3g/cm3. Materials with hardness of 0A- 15A generally have no filler, so the density is low, ranging from 0.84 to 0.88. The density range of foamed TPE is 0.6-0.8. Some products may have special requirements. Various fillers can be added to the raw material formula, and the density is 1.3-2.0g/cm3.
For the upstream tpe factory, the higher the specific gravity (density), the lower the material price, regardless of other properties of the material. Therefore, under the condition of not affecting the properties of materials, when the price requirements of materials are low, adding fillers into materials can achieve the purpose of reducing costs.
Which is better, TPE or silica gel?
TPE has the characteristics of high strength, high resilience and injection molding, and is widely used. However, the heat resistance of TPE is not as good as that of rubber, and its physical properties decrease more with the increase of temperature, so the application scope of TPE is specified.
At the same time, compression deformation, elastic recovery and durability are worse than those of rubber, and the price is often higher than that of similar rubber. However, the advantages of TPE are still outstanding, and various new TPE products are constantly being developed. It is a new energy-saving and environment-friendly material with good development prospects.
Silicone rubber refers to rubber whose main chain is connected by silicon and oxygen atoms, and there are usually two organic groups on the silicon atom. General silicone rubber is mainly composed of methyl silicone rubber and a small amount of vinyl. Adding phenyl to silicone rubber can improve the low temperature resistance of silicone rubber, and the introduction of trifluoropropyl and cyano can improve the temperature resistance and oil resistance of silicone rubber.
It has good cold resistance and cold resistance, and can still be used at -55℃. At -73℃, phenyl was added. Silicone rubber also has outstanding heat resistance, which can work at 180℃ for a long time, and can withstand several weeks or even longer when it is slightly higher than 200℃, and can withstand high temperature above 300℃ instantly. Silicone rubber has good air permeability and high oxygen permeability in synthetic polymers.
TPE and silicone rubber are not superior or inferior. These two materials have their own advantages, and their application ranges are slightly different. Like TPE materials, it is more inclined to daily necessities, toys and wires. Moreover, silica gel is more used in medical industry, food packaging and sex toys.
Where is the TPE manufacturer?
TPE has not been used for a long time in China, and there are not many manufacturers engaged in TPE production, mainly in Guangdong. In 2007-2009, there were some thermoplastic elastomer manufacturers mainly in Guangdong, Jiangsu and Zhejiang. After 20 10, more small and medium-sized TPE manufacturers have sprung up, distributed in Guangdong, Jiangsu, Zhejiang, Fujian, Shandong, Hebei, Henan, Hubei and other places.
In terms of the number (distribution density) of TPE manufacturers, Guangdong (Dongguan, Shenzhen, Huizhou, Zhongshan, Foshan, etc. ), Jiangsu (Suzhou, Nanjing, Wuxi, etc. ) and Zhejiang (Ningbo, Hangzhou, Wenzhou, Jinhua) are relatively concentrated. In recent years, the number of TPE manufacturers in Shandong, Hebei and other places has gradually increased. TPE producers are mainly distributed in three regions in China, namely Guangdong, Jiangsu and Zhejiang, and Shandong and Hebei.
Generally speaking, when an older TPE manufacturer with rich production experience is established, the strength of R&D technology is generally stronger. Naturally, some newly established TPE manufacturers may catch up if they are willing to invest in advance and work hard on technology research and development.
In principle, you can consider the TPE manufacturer near you first when choosing TPE manufacturer. However, if the technical requirements for products are relatively high, it is recommended to choose manufacturers with strong R&D capabilities and strength.
In this era of fierce competition, even tpe manufacturers can insist on themselves day after day on 18, putting product quality first. In Yiwu, a place where explosions in online celebrity continue, we can get a large share of orders for every TPE product, which shows that our technology research and development capability is still strong enough. We are never absent from every explosive product. We beat the market with quality, impress customers with price, and treat every new and old customer with heart.
Founded in 2003, the company introduced a complete set of imported tpe thermoplastic elastomer equipment (parallel twin-screw extruder, underwater cutting, stretch cutting and water ring cutting) and equipped with corresponding testing facilities. It is expected to move into the new factory in the second half of 20021. By then, the company will have 8 tpe thermoplastic elastomer production lines in Jinhua, Zhejiang, 2 tpe testing machines, 8 TPE thermoplastic elastomer production lines in Dongguan and 4 production lines in Chengdu.
The above are some common questions about what material TPE is. Of course, to play TPE (thermoplastic elastomer), you need to master many physical parameters, such as how high temperature resistant TPE is, how hard TPE is, how long TPE is, TPE injection processing technology, TPE extrusion temperature and so on.
Construction cost of smart factory
The construction cost of smart factory consists of software platform cost, IOT equipment cost, network cost and other expenses. Smart factories use the Internet of Things technology to implant AI intelligence, sensing technology, virtual reality and other high-tech into buildings, machinery, personnel wearing facilities, entrances and exits of construction sites and other objects, and realize data interconnection, form the Internet of Things, and then integrate with the Internet to realize the digital integration of project managers and engineering construction sites. Its core is to improve the visualization and intelligent management of engineering construction by intelligent methods, so as to improve the informatization level of engineering management.
How much can you earn by wearing armor and processing in one day?
100 to 1000 yuan.
Nail piercing is a simple manicure that can be worn and removed anytime and anywhere, which is convenient to carry and wear. It is different from the traditional disposable nail polish. It has high flexibility and can be reused.
Traditional manicure takes a long time, and the chemical components in nail polish have an impact on nail health. Comparatively speaking, it is more time-saving to apply glue to nails directly, and most of them use jelly glue, which is healthier to use.