1. How to install the wall-mounted cassette 1? Hidden card holder: the square iron frame 96 is embedded in the wall, the intelligent panel is higher than the wall, and the wall can be clearly installed: the exposed frame protrudes to hide the wall, and the socket, switch installation box and installation surface are combined and linked.
2. If the socket switch is installed, the junction box must have a junction box with zero wire, live wire and ground wire, which leads to the direction of the lamp holder. If there is no grounding wire, there must be at least three wires. Only in this way can one switch contact the active cable and socket, and if the neutral wire contacts, three hole socket will be more suitable for the connection of other switch cables.
There are about two holes and three holes in the general household socket. If there are two holes, we can open the socket cover, and the two terminals of the socket can connect the negative wire and the live wire. The negative wire must be connected as well as possible, then the live wire is connected, and finally the junction box is installed. In any case, firewire and convertible currency are interrelated. Then, the third hole in the line, the center pin terminal, can be connected to the ground wire.
Second, how to install the wall-mounted cassette-the installation height of the cassette is 1. The family has no special requirements for ordinary power outlets, which are 0.5 meters from the ground and installed at the same height. At a distance of about 6 cm, the walls of audio-visual equipment, desk lamps, wiring boards, etc. They are 0.4 meters above the ground. It is made according to the special box of TV set. The water outlet of the washing machine can be 1.5 to 1.7 cm on the floor; The terrace can be off the ground 1.6 meters.
2. The height of home appliances is different, so the height of the installation box is different. For example, the kitchen stove, the distance from the water outlet 1.5 meters to the range hood at the water outlet of the electric boiler to be built must be about 2 meters, and the base can also be used. To adjust the power supply, the position of the refrigerator socket must be set at about 1.5 meters.
The above content is how to install the wall-mounted cassette. There are also some installation height requirements, which also require a suitable height to be convenient to use.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~