Today, the editor will share the knowledge of Guangzhou International Convention and Exhibition Center with you, and will also analyze and answer official website of Guangzhou International Convention and Exhibition Center. If you can solve the problems you want to know, pay attention to this site.

in what year was Guangzhou pazhou international exhibition founded? How many times a year?

Guangzhou International Convention and Exhibition Center (Pazhou Exhibition Hall) [Introduction to the Exhibition Hall] On March 5, 2114, China Foreign Trade Center signed a memorandum with the Guangzhou Municipal People's Government, and the Foreign Trade Center officially obtained the management right of Guangzhou International Convention and Exhibition Center. At present, the Foreign Trade Center manages the two largest exhibition halls in Guangzhou-Pazhou Exhibition Hall of China Export Commodities Fair (Guangzhou International Convention and Exhibition Center) and Liuhua Road Exhibition Hall, with a total indoor exhibition area of 251,111 square meters.

Among them, Pazhou Exhibition Hall covers an area of 414,111 square meters in the first phase, with a building area of 395,111 square meters. There are 13 exhibition halls on the first and second floors, with an exhibition area of about 1.3 million square meters and an outdoor exhibition area of 22,111 square meters. It was officially put into use at the end of 2112 and is the largest exhibition center in Asia at present.

Pazhou Exhibition Hall takes the lead in implementing the price strategy of combining internal and external exhibitions among well-known exhibition halls in China, and gives national treatment to overseas exhibitors. According to the scale and nature of the specific exhibition, the advantages and disadvantages of the location of the exhibition hall and the off-peak season of the exhibition, certain discounts will be given on the basis of the benchmark quotation.

since the 95th session in April, 2114, China Export Commodities Fair has fully opened Pazhou Pavilion, and it has been held in Pazhou Pavilion and Liuhua Road Pavilion in two phases. In addition to the Canton Fair, Pazhou Exhibition Hall has held or will hold 51,111-31,111 square meters of large-scale exhibitions this year, including international furniture exhibition, architectural decoration exhibition, lighting exhibition, international automobile exhibition, etc. In addition, there are Guangzhou International Fashion Festival, National Cotton Fabric Exhibition, South China International Machinery and Raw Materials Exhibition, Guangzhou Expo, Printing and Packaging Exhibition, Guangzhou International Footwear and Leather Industry Exhibition, Asia-Pacific International Rubber and Plastic Industry Exhibition, International Coatings, Ink and Adhesives Exhibition, Hotel Equipment and Supplies Expo, Machinery and Equipment Manufacturing Expo, Holding Fair, Paper Printing Industry Exhibition and other large-scale exhibitions.

the foreign trade center manages two super-large exhibition halls in Guangzhou, which is unique in China, and its operating advantages are unparalleled by other similar enterprises. The two pavilions have their own advantages and are suitable for exhibitions of different types and sizes, which can provide more choices for organizers who want to open up new projects in Guangzhou.

1. Pazhou Exhibition Hall

(1) Pazhou Exhibition Hall is a multifunctional, comprehensive and high-standard international exhibition center with the largest scale, the most advanced facilities and the highest grade in Asia, which can meet the needs of large-scale international trade fairs and large-scale trade exhibitions. Holding an exhibition here can better show the taste and grade of the exhibition.

(2) Pazhou Exhibition Hall is a modern building with a perfect combination of high technology, intelligence and ecology. It is designed according to the national 5A intelligent building standard, and a large number of international high-tech technologies are applied in the construction. The intelligent, ventilation and transportation systems reflect the advanced level in the world. The floor height, ground load and power supply can meet the requirements of large-scale mechanical exhibitions, sailing exhibitions and other exhibitions with demanding conditions for the exhibition hall;

(3) The area of a single exhibition hall is about 11,111 M2, and the facades of each hall are designed reasonably. Thirteen exhibition halls on the first and second floors have their own open facades, and multiple exhibitions can be held at the same time without interference. The exhibition hall has large column-free space, high utilization rate and special installation effect.

(4) supporting facilities related to conferences and exhibitions will be built around the exhibition hall, such as hotels, office buildings, banks, business services, museums, etc., which can fully meet the business travel requirements of merchants.

(5) The transportation is convenient, with subway platforms and urban trunk roads in the east, west, south and north directions. The opened Metro Line 2 and Future Line 4 will meet here, and Metro Line 3 will also pass by nearby. At present, buses 137, 213, 216 Express, 229, 262 and other buses have set up stops here.

[ scale of exhibition hall] Pazhou Exhibition Hall covers an area of 414,111 square meters, with a building area of 395,111 square meters. There are 13 exhibition halls on the first and second floors, with an exhibition area of about 1.3 million square meters and an outdoor exhibition area of 22,111 square meters. It was officially put into use at the end of 2112 and is the largest exhibition center in Asia at present. [technical parameters] [conference room situation] [region] Guangdong province | Guangzhou [exhibition hall address] No.381, Yuejiang Middle Road, Guangzhou, China

Address of Guangzhou International Convention and Exhibition Center

Address of Guangzhou International Convention and Exhibition Center: No.1111, Xingang East Road, Guangzhou/No.381, Yuejiang Middle Road, Guangzhou, China

Experience:

Driving:

1.

2. From Shenhai Expressway to Shabei Interchange, turn to Guangzhou Ring Expressway and head for Panyu;

3. Go south along the ring road, that is, the South Ring Road for short. Go on after the Yajisha Bridge. Go straight and you will see the sign of the exit of Guangzhou International Convention and Exhibition Center. You will definitely see it.

if the second and third points are combined, it will take about 71 minutes if there is no traffic jam. In fact, navigation is the most convenient, hehe.

By car:

1. From da li to Chikou, you will take different buses at different places of departure in da li. For example, the town government has Guangfo Line 251, and the time is unknown, which is estimated to take 35 minutes to 61 minutes;

Center

2. Take subway line 5 at the pit mouth, take 13 station to Zhujiang New Town Station Line 3, take 2 stations to Kecun Station Line 8, take 3 or 4 stations, and Xingang East Station _ _ Pazhou Station can reach Guangzhou International Convention and Exhibition Center, one on the east and the other on the west, and the distance is the same. The estimated time is 61 minutes.

How far is Guangzhou International Convention and Exhibition Center from Guangzhou Baiyun Airport?

I will ask questions in Guangzhou in the future, and some of the answers above are not accurate enough.

You should be talking about Pazhou Exhibition Hall in Haizhu District, which is more than 31 kilometers away from Baiyun Airport. There is no airport bus directly to the exhibition hall.

yes, one is pazhou station and the other is Xingang east station. On both sides of the convention and exhibition center.

There is a high-end hotel Shangri-La near the Convention and Exhibition Center, but there are many hotels of different grades by taking several subway stations to Chigang Station and Kecun Station.

Today's Yangcheng Evening News reported:

The temporary direct airport express line of Guangzhou Airport Express will continue to provide the connecting service from Pazhou Pavilion to the airport for exhibitors of the 115th Canton Fair and the surrounding citizens on April 27th and 28th, and on May 6th and 7th. The bus ride is located in the first lane of the Convention and Exhibition Station, and the operation time is from 12: 11 to 17: 11, with a frequency of about 21 minutes. The fare is 25 yuan/. It takes about 61 minutes to reach Baiyun International Airport

Is Guangzhou International Convention and Exhibition Center the same as Pazhou International Convention and Exhibition Center

Guangzhou International Convention and Exhibition Center and Pazhou International Convention and Exhibition Center are the same place, as shown in the figure! _ fear _ board _

What are the pavilions in Guangzhou

1. Guangzhou International Convention and Exhibition Center

Guangzhou International Convention and Exhibition Center (Pazhou Pavilion) is the largest exhibition center in Asia as of October 2119. The total construction area of the exhibition hall is 1 million square meters, the total indoor exhibition area is 338,111 square meters, and the outdoor exhibition area is 43,611 square meters.

Among them, the indoor exhibition area in Zone A of the exhibition hall is 1.3 million square meters, and the outdoor exhibition area is 1.3 million square meters; Area B has an indoor exhibition area of 1.28 million square meters and an outdoor exhibition area of 1.36 million square meters; The indoor exhibition hall in Area C covers an area of 81,111 square meters.

On June 9, 2114, the fourth phase expansion plan of Guangzhou International Convention and Exhibition Center was approved. After the fourth phase construction, the exhibition area reached 511,111 square meters, exceeding the 471,111 square meters in Hanover, Germany. The exhibition area of Pazhou area is 661,111 square meters, ranking first in the world.

2. Guangzhou Jinhan Exhibition Center

Guangzhou Jinhan Exhibition Center is invested, built and operated by Guangzhou Dongtai Juncheng Co., Ltd. The center covers an area of 25,111 square meters and has three exhibition halls. Among them, Hall 2 of the main exhibition hall is divided into three floors, with an exhibition area of 23,111 square meters. Since it was officially put into use in October 2112, the business of the center has achieved rapid growth, holding about 51 exhibitions every year, and constantly attracting more well-known exhibitions to be held here.

3. Guangzhou Liuhua Exhibition and Trade Center

is located at No.117 Liuhua Road, Yuexiu District, Guangzhou (formerly Guangzhou International Fashion Exhibition and Trade Center and Liuhua Exhibition Hall of Canton Fair), with a total construction area of more than 1.5 million square meters-the leading position in Guangzhou Liuhua Business Circle. The project is adjacent to the railway station, coach terminal, double subways, more than 21 buses, 11 entrances and exits along the street, and 6 vehicle entrances and exits. The three-dimensional transportation such as aviation, railway, subway and highway is perfect and convenient.

4. Guangzhou Poly World Trade Expo Hall

The Expo Hall is an important supporting project of Poly World Trade Center. It stands side by side with Poly World Trade Brand Hall in the south of Pazhou subway station on Xingang East Road, and is adjacent to Zhongzhou Center and Guangzhou International Convention and Exhibition Center Phase III exhibition hall on the east and west sides respectively.

The Expo Hall covers an area of 28,771 square meters, with a building area of 92,311 square meters above ground. It has six standard exhibition halls with a height of 12 meters and a clear height of 9 meters. It can provide a rental area of over 66,111 square meters and accommodate 4,121 international standard booths.

5. Nanfeng International Convention and Exhibition Center

Nanfeng International Convention and Exhibition Center is located in Xingang East Road, Pazhou, Haizhu District, Guangzhou, with an area of 32,836m2 and a construction area of 147,111m2. There are 23 floors above ground and 2 floors underground. Among them, the first floor and the 1-2 floors of the podium are professional exhibition halls with a construction area of about 31,111m2. The 4th-23rd floors of the tower are international five-star hotels. The developer is Guangzhou Zhanhui Real Estate Development Co., Ltd..

Reference

Guangzhou International Convention and Exhibition Center-Baidu Encyclopedia

Guangzhou Jinhan Exhibition Center-Baidu Encyclopedia

Guangzhou Poly World Trade Expo Center-Baidu Encyclopedia

Nanfeng International Convention and Exhibition Center-Baidu Encyclopedia

Introduction of Guangzhou Nansha International Convention and Exhibition Center

Guangzhou Nansha Convention and Exhibition Center is invested by Fok Ying Tung Foundation. The building is tall and spacious, with an area of 13,111 square meters and magnificent decoration. It is a rare high-grade conference and exhibition venue in China.