Martian integrated stove E is a high-tech catering appliance with multiple functions. It not only has the cooking function of the traditional cooker, but also has many special functions such as disinfection, deodorization and drying. However, like all electrical appliances, it may also fail. So, what are the possible faults of the Martian integrated stove E? Here is a brief introduction.

1. Unable to heat

When the cooker is started, the Martian integrated cooker E fails to heat, which is usually caused by water inflow or short circuit of the cooker. When this happens, we need to check the circuit of the cooker and clean the water inlet pipe inside the cooker to ensure the normal operation of the cooker.

2. Ignition failure

When the Martian integrated stove E is started, the gas should be ignited by ignition. If the ignition failure occurs, it may be caused by poor matches or blocked fire holes. It is necessary to check whether the fire hole is blocked by burning objects, or change matches and try to restart.

3. Circuit failure

During use, circuit failure is also a common failure. At this time, the cooker cannot be started normally or turned off normally. In this case, it is recommended to contact professional maintenance personnel, or check and eliminate the problem by yourself according to the instructions provided by the manufacturer.

4. Fault code prompt

Martian integrated stove E also has a fault code prompt function. When the stove fails, corresponding fault codes, such as E1 and E2, will appear on the screen. At this time, it is necessary to look up the manual and carry out corresponding maintenance and troubleshooting according to the prompt information provided by the fault code.

generally speaking, there are many possible reasons for the failure of Martian integrated stove e, but the solution to the problem is usually very simple. As long as you follow the instructions or find professional help to solve it, you can easily remove the failure and make the stove work normally again.