5 essays on quality inspection summary

As a quality inspector in Yilun Call Center, we must first know the name, job number and service quality of each employee. The following is a summary essay on quality inspection that I have compiled for you, hoping to help you!

summary of quality inspection (1)

on behalf of the hotel quality inspection department, I summarized the work of this department for 21__ years as follows:

1. Sanitary inspection: the original detailed rules for sanitary inspection were revised and improved, the intensity of sanitary inspection was strengthened, and the number of sanitary inspections was increased.

2. inspection of engineering problems: items needing maintenance are found in the weekly routine inspection and reported to the engineering department in time.

3. Special quality inspection of star rating: refer to the standards of four-star hotels, check and find the items that do not meet the star rating standards, and feed back to all departments for rectification.

1. Front office: As the facade of the hotel, the front office has always had high hygiene requirements. Because there is more dust in the lobby, health problems are generally concentrated here. Compared with the past, the health situation has greatly improved, but we still need to continue our efforts.

2. Housekeeping Department: The hygiene of guest rooms is our key inspection object, so the requirements are very strict, so the hygiene of each floor has been improved to varying degrees. For the sanitation of low floors, it is relatively more difficult because of the relatively more dust and more guests, so we should also express our understanding, but we still hope that the waiters will do a good job in room sanitation with high standards and strict requirements.

3. Security Department: The sanitation has been good during quality inspection, but the sanitation of the front and rear parking lots has been unsatisfactory. There is also the issue of fire safety inspections. During the quality inspection, it was found that several inspections were not timely. I don't know what the usual inspections will be like. In short, there is no small matter of safety, so we must do a good job in fire safety inspections to prevent problems before they happen.

4. engineering department: there are many routine maintenance items pointed out by quality inspection, which shows that the routine maintenance inspection of engineering department is not in place, and I hope to pay attention to it in the future.

5. pa Department: pa is responsible for many areas. Although there are often inadequacies, they can be corrected in time after being pointed out, which is also good for the sanitary condition of the customer service area. The health of pa group should be planned by classification, and the health items that should be done every day, week and month should be made into tables to remind themselves to implement them.

6. Bathing Department: The sanitation of bathing men's and women's water areas is still not in place at ordinary times, and there are many dead ends, but they can be corrected in time after being pointed out, perhaps because the bathing area is large and the workload is heavy, but I still hope that the waiters will do a good job in the sanitation of the bathing area with high standards and strict requirements.

In short, with the cooperation of all departments in the past year, the sanitary condition of the hotel has reached a new level. In the next year, quality inspection will pay equal attention to hygiene and service. I hope we can make progress together.

1. The quality inspection department needs to improve its tabular and standardized management. The data analysis and summary carried out by the quality inspection department is still relatively simple, the level is not deep enough, and the content collection is incomplete.

2. Inadequate allocation of quality inspection personnel leads to centralized inspection and lack of usual supervision. To professionalize quality inspection, we must have full-time quality inspection personnel, and establish and improve the system of regular inspections and spot checks.

3. The communication ability and collaboration ability between departments need to be strengthened. As a quality inspection department, we should strengthen communication and cooperation while carrying out various tasks, so as to create a good and harmonious working environment for the inspection atmosphere.

4. The follow-up inspection of quality inspection items is not strong enough. Mainly depends on the department's self-inspection, resulting in the lazy quality inspection work summary model essay (Chapter 2)

__ year is about to say goodbye. The memories of this year are busy and fruitful, which makes me happy and worried. I have been doing quality inspection in injection molding workshop for more than 3 years, and I really have to work under pressure, but for me, no pressure means no motivation. As a quality inspector, in order to make myself grow faster and improve my work level, I have made the following work summary this year:

First, check the quality of work

As a quality inspector, I should not only master professional inspection knowledge, but also carefully discover problems, discover problems and solve them. So this year's on-site quality work has benefited me a lot. Learn to understand the product drawings and try to install the product before inspection. According to the requirements of the quality process, do a good job of supervision, find and correct the problems existing in the inspection process. Cooperate with operators to conduct a comprehensive inspection of product quality, raise and correct problems in time.

follow up and check the whole process of special product processing technology to ensure that each process is qualified. Strictly control the quality of incoming materials and summarize and analyze the results afterwards, so as to facilitate the continuous improvement of the work. Hand in the quality problems in the inspection process before work every day. Record the advantages of future problems that are easy to appear in the inspection process, and constantly improve the personal professional inspection level; Seriously reflect the quality problems existing in the site and the problems that the company needs to solve.

II. Shortcomings and problems in the work

There is still a necessary gap in product quality requirements, which leads to the phenomenon of small batch returns. On the one hand, due to the lack of detailed personal assessment and sufficient professional knowledge, on the other hand, the workload is heavy and the work efficiency is not high when working for a long time. I'm not sure if I find quality problems. I am not decisive, and I need the help of the leader to deal with some things. At present, due to the shortage of quality inspectors, long working hours and increased workload, no one can take a vacation instead of one person.

III. Work plan and improvement for next year

I will further develop my advantages, improve my shortcomings and do my best to do my job well. We must adhere to a good mental state and carry forward the spirit of hard work, overcoming difficulties, striving for perfection, being rigorous and meticulous, learning and enterprising, and being brave in struggle. Clear up work ideas and improve work efficiency. Before inspection, we must first understand the products that need to be inspected, make preparations before inspection, and carefully supervise the inspection.

Our company is humanized management, focusing on cultivating employees' skills, team spirit and enthusiasm for going to work. I believe that I must grow together in the development of your big family, and we must grow stronger! Summary of quality inspection (Part 3)

After our company won the bid for the safe drinking water project of Hongshawo Forest Farm, we immediately set up the project construction department to be responsible for the implementation and construction of the project. At the same time, the technical backbone with rich construction experience and strong business ability is dispatched as the technical director to be stationed at the construction site. We will carry out the construction in strict accordance with the design scheme provided by the owner, adhere to the policy of "quality comes first", carefully construct, strictly manage, reasonably arrange construction machinery and equipment, make full use of effective working hours, improve mechanical efficiency, and ensure the project to be completed on schedule according to the construction organization plan. The completion of the project is summarized as follows:

1. Overview of the project

The project area is located in Hongshawo Forest Farm in Ganzhou, and this project is mainly used to solve the problem of safe drinking water for employees in Hongshawo Forest Farm. The main construction contents of this project include: a maintenance management room and a water purification room, each with an area of * * * 21m2, a water tower with brick-concrete structure (with a height of 16m and a volume of 21m3), five inspection wells, a 111QJ2-111/21 water pump, a GTBT-NF-9 water purification unit, 4.7km of pipelines and 4 sets of household facilities.

II. Project Management

1. Project Construction Process

After the project won the bid, the project department prepared the construction organization plan in time, and organized the construction team to enter the construction site in time according to the characteristics of the project.

during the construction of the project, the company assigned a special person to be responsible for the construction and quality inspection of the project. At the same time, the leaders of Hongshawo Forest Farm visited the construction site for irregular inspection and guidance, and put forward good opinions and suggestions, which effectively controlled the quality and progress of the project.

2. Project budget and financing. The total investment of this project budget is 351,111 yuan.

3. Contract management

In order to ensure the quality and quantity of the project to be completed on schedule, this project * * * signed 1 contracts with a contract amount of 351,111 yuan. During the execution of the contract, both parties consciously fulfilled their respective rights and obligations, and there was no contract dispute, and the contract performance was good.

4. Material supply

The cement, aggregate and other materials needed for the project construction are purchased by our unit, and all kinds of products must have certificates of approval and experimental reports before they can enter the construction site. Finally, they can be used under the supervision of engineering and technical personnel and quality inspection personnel. In engineering construction, all kinds of materials are supplied in time, the quality is reliable, and strict material management ensures the progress and quality of engineering construction. The total amount of the safe drinking water project in Hongshawo Forest Farm is 8384m3, including a main maintenance management room and a water purification room, each with an area of * * * 21m2, a water tower with brick-concrete structure (with a height of 16m and a volume of 21m3), five inspection wells, a 111QJ2-111/21 water pump, a GTBT-NF-9 water purification unit, and the laying of various pipelines. Consumption of cement 23, steel 2 tons. 461 labor days were completed.

5. Price settlement

The price settlement of this project shall be reported by the contractor, the owner and the site supervisor after reviewing the actual quantities, and then reviewed by the leaders of Hongshawo Forest Farm, and then paid according to the completed project price after being signed by the project leader. Up to now, the project has completed all the contract quantities.

III. Project Quality

1. Project Quality Management

Before the implementation of this project, the project department worked out a detailed plan to complete the project construction task with a high starting point and high standards. During the construction process, according to the established project quality control standards, it was monitored by a special person, and the leaders of Hongshawo Forest Farm visited the site regularly or irregularly, and the quality inspectors strictly controlled the quality to ensure that there was no problem in the project quality.

2. Quality control of major projects

2.1 Quality control of machine well project

2.1.1 Selection of drilling equipment

According to the design depth of the well and the construction experience of our company, Red Star -311 water source drilling rig was selected for construction, and drilling was officially started on September 2, 21. Strictly observe the following operating procedures during equipment installation:

1. The drilling rig is installed on a stable foundation, the local beam is placed in a straight and stable way, and the protective pipe is lowered vertically.

2. A lightning rod is installed at the top of the drilling tower, and the auxiliary leg is supported stably.

3. According to the actual situation on site, the transportation loading and unloading site, the placement of drilling tools and pipes, mud pits, mud pumps, mud circulation tanks, etc. are arranged so as not to affect each other.

4, electrical appliances placed in windproof, rainproof, moisture-proof places, to ensure the safe use of electricity.

5. After the drilling rig is in place, the rotary table and the protective tube are aligned concentrically, the fuselage is balanced, the rotary table is horizontal, and the center of the starting, pulley and orifice is kept "three points and one line".

2.1.2 drilling method

this well adopts the construction scheme of all-round drilling without core. Φ451mm jet tri-cone bit is selected for opening.

2.1.3 Construction safety measures

1. Observe drilling safety operation procedures;

2. Safety protection facilities are complete and reliable;

3. Strictly implement the post operation procedures;

4. Strictly require the construction personnel to consciously abide by the relevant rules and regulations of the owner.

2.1.4 Problems that should be paid attention to in drilling

1. When drilling, the rotating speed is slow and the pressure is even, so as to ensure the vertical wellbore;

2. Strictly control the WOB, and the pressure at the bottom of the hole shall not exceed 81% of the weight of the drill collar;

3. Always pay attention to whether the pump pressure, pump volume and pump sound are normal;

4. Carefully operate, feed the drill evenly, pay attention to the drilling speed and bit operation, and take measures to deal with it in time if it is found that the torque is increased, the drilling jump is serious and the footage is slow.

5. The wellbore is vertical, and there is no abrupt change in azimuth and vertex angles;

6. The wellbore is round, and there is no spiral, excessive oversize and shrinkage;

7. Pay attention to measuring mud performance and adjust mud performance index according to formation change.

2.2 Well completion technology

2.2.1 Geophysical logging

After geophysical logging, the exposed strata are comprehensively analyzed and interpreted according to logging curves and drilling judgment data, and the water intake section is determined to be 31-51m.

2.2.2 hole drilling, mud scraping and slurry changing by punching

After geophysical logging, run drilling tools to the bottom of the hole, drill them after all the dregs are returned, replace them with brushes, destroy the mud in the water intake section, and then punch and slurry changing until all the dregs in the hole are returned and the slurry performance meets the design requirements.

2.2.3 Run the pipe into a well

1. Make full preparations before running the pipe, with fine division of labor and clear responsibilities; Carefully check the quality of well pipe, such as sand holes, welding quality and other supporting equipment, such as reducer, splint, centralizer, etc. Accurately measure the length of well pipes and number them, and put them in order. When running the pipe, the well shall be completed according to the requirements of technical specifications.

2) Filter material

According to the stratum conditions, D1-3mm natural Shi Ying gravel is used as the filter layer.

3), water stop

The water stop material is high-quality clay ball, which is divided into two sections to stop water.

4) Cementing

The cementing material is D11-21mm gravel, the cementing position is 21-74.5m, and the dosage of gravel is about 11m3. Summary of Quality Inspection Work (Chapter 4)

In the busy work, a new year is ushered in unconsciously, and the year of 21__ is meaningful, valuable and even more rewarding. Looking back on this year's work, as an employee of the company, I deeply feel the hot air of the company's vigorous development. In the past year, under the guidance of the leaders, through their unremitting efforts, they have cast themselves into a soldier who can fight hard, but there are also many shortcomings. Looking back on the past year, the work is summarized as follows:

1. Work achievements

Compared with the work achievements in _ _ _ _, the achievements in _ _ _ _ were really by going up one flight of stairs.

the company leaders predicted that _ _ will be a bumper year for our company. First of all, we should stock the inflatable cabinets in large quantities to pave the way for future busyness. In just two or three months, more than 211 units were stocked. It also did not delay the normal shipment of contract items.

Then, various plans, large and small, flooded into our inflatable cabinet group. There are 71 HWGO-4K*** projects in Dongguan, Guangdong, 22 HWGO-2K4V-D*** projects in Zhangjiakou, Hebei, 57 HWGO-4K ~ 6K * * projects in Nanhai, Foshan, Guangdong, 15 HWGO-6K-D * * projects in Shanxi and HWGO-4K-projects in Weifang, Shandong.

II. Shortcomings

During the experiment of two maintenance cabinets, it was found that the circuit resistance was blocked. When the cabinets were cut open, the fixing bolts of the main circuit were not tightened. Through this incident, it shows that the workbench is too negligent.

With the continuous progress of the company, I get along with you day and night, so that I can constantly increase my work experience through enrichment. Sometimes, the heavy work is too much for me. If you want to work, you must have a sense of responsibility. It is my bounden duty to be a quality inspector. Every time I sprint my God in this way.