lead: everyone is familiar with range hoods, right? The range hood is an indispensable appliance in every family. With the existence of the range hood, we can shoot all the lampblack generated in the kitchen. We should all be familiar with the use of the range hood, right? So, do you know the installation method and precautions of range hood? I believe that many people just know how to use it, but they don't know much about the installation method, so let's take a look at it with Xiaobian!

installation method of the range hood

Determine the installation position of the hanging plate

The installation position of the range hood is just above the cooker and on the same axis with the cooker. The height of the bottom of the top-suction range hood is 65-75cm from the cooker surface, and the bottom of the side-suction range hood is 35-45cm from the cooker surface. According to the size of the specific range hood product, find the installation position of the pinch plate on the back and draw the line with a pencil.

in addition, if the installation position of the range hood product is still some distance from the top, in order to hide the smoke pipe, you can customize the range hood extension cover, and before installation, you should also determine the position of the extension cover hanging plate.

drilling and installing the hanging plate

after determining the installation position of the hanging plate, drill a hole with a depth of 5-6cm at the installation position with an impact drill, press the expansion pipe into the hole, and then fix the hanging plate reliably with screws.

hang the range hood on the hanging board

the style behind the range hood can be embedded with the hanging board, thus hanging the range hood. Because the range hood is generally heavy, it usually needs two people to cooperate when hanging it.

installation method of range hood

install the smoke exhaust pipe

insert one end of the smoke exhaust pipe into the notch between the inner and outer rings of the check valve outlet and fasten it with screws. The other end directly extends into the outdoor through the reserved hole. If the smoke exhaust pipe is connected to the public flue, it must be connected with the smoke return check valve of the public flue and sealed. If the smoke is discharged to the outside of the wall, it is suggested to install blinds outside the smoke exhaust pipe to avoid reinjection.

install the extension cover

this is only for products that need to install the extension cover. As mentioned earlier, if it is necessary to install the extension cover, the hanging plate must be installed first. Then, after the range hood and smoke exhaust pipe are installed, fasten the extension cover.

Install oil cups and other accessories

Next, only the oil cups, masks and other accessories of the range hood are left. After the accessories are installed, the range hood is basically installed.

Precautions

1. Precautions for drilling

Before installing the range hood, be sure that there are no water pipes, gas pipes and wires passing through the drilling part to avoid damage or even electric shock.

2, pay attention to keep the level

The range hood must pay attention to the level of the machine body during installation, and observe its levelness after installation to avoid tilting. Ensure that the range hood does not shake or unhook.

3. Precautions for installing smoke exhaust pipe

If the smoke is discharged to the flue for * * *, do not insert the smoke exhaust pipe too deep to increase the smoke exhaust resistance. If it leads to the outside, make sure that the smoke exhaust nozzle protrudes 3cm. The exhaust pipe should not be too long, preferably not more than 2 meters, and the bending should be minimized to avoid multiple 91-degree bends, otherwise it will affect the oil smoke absorption effect.

4. Try the machine after installation

After the installation of the range hood, be sure to remember to debug the range hood. Generally, it is through the switch of the function key to see if it works normally.

5, do a good job of protection

after the lampblack machine is installed, if there are other renovation projects in the kitchen, it is necessary to do a good job of protecting the lampblack machine. You can put a plastic protective film on the range hood.

These are the installation methods and precautions of the range hood introduced by Xiaobian. The use of range hoods is very extensive. Basically, there is a range hood in every kitchen. Whether it is a family or a restaurant, the existence of range hoods is very important. Therefore, it is very useful for everyone to have a good understanding of the installation method and matters needing attention of the range hood. Maybe one day you need to install the range hood yourself. Therefore, I hope everyone can take a good look at what Xiaobian introduced for everyone.

Tuba Rabbit online provides you with "decoration quotations, 1-4 local decoration companies, 3 sets of decoration design schemes" for free, as well as the decoration pit avoidance strategy! Click this link: /yezhu/zxbj-cszy.php? to8to_from=seo_zhidao_m_jiare& Wb, you can get it for free ~