one: when the equipment is running, it will emit continuous screams and sometimes even sparks.
at this time, you should check whether the voltage of the electrostatic fume purifier is too high, whether the humidity in the box is too high, whether there are sundries in the electric field or whether the insulation material is damaged. The method of troubleshooting is to adjust the voltage (there must be professional guidance). If the humidity in the box is too high, it should be dried and automatically recovered after drying. There is no sundries in the electric field, and the insulation material should be replaced in time if it is damaged
2: Kuaiba electrostatic fume purifier has an induction power supply, which works normally, but the equipment does not respond.
when this kind of fault occurs, you should check that the outer box is grounded, ensure that the cylinder and the pole pin in the electric field are in contact with each other, ensure that the insulator or insulating porcelain in the electric field is intact, and adjust the electrode thimble to have good contact with the electric field.
third, the electrostatic oil fume purifier leaks oil, which may be caused by too much accumulated oil, damaged sealing strip of the door, deformation of the cylinder in the electric field or deviation of some grades of needles. The troubleshooting methods are: regularly clean up the accumulated oil in the electrostatic fume purifier, replace the sealing strip and correct the grade needle.
when users use the fume purifier, they should form the habit of regular inspection, regular cleaning and regular maintenance. Only by doing regular maintenance and protecting the normal operation of the equipment can the service life of the equipment be prolonged, which means that the cost is reduced, and the cost reduction means that the benefit is improved.