Current location - Recipe Complete Network - Catering training - How to install the exhaust fan and what are the steps?
How to install the exhaust fan and what are the steps?
Presumably, through the introduction of the previous article, everyone is familiar with the fire-fighting high-temperature smoke exhaust fan, which is suitable for ventilation and high-temperature smoke exhaust in high-rise buildings, underground buildings, tunnels and drying rooms. As a technician of this product, today I will tell you the matters needing attention in the installation process of fire-fighting high-temperature smoke exhaust fan: read the instructions carefully before installation, check whether the blades and casing are deformed due to transportation, check whether the bolts are fastened, and be responsible for repairing them before use. When installing the fan, the adjusting bolt of the motor should be in a convenient position to adjust the belt tightness when using. When installing the fan bracket, make sure that the bracket is horizontal and stable with the foundation plane. If necessary, install angle iron next to the fan for reinforcement.

The air duct connecting the inlet and outlet of the fire high-temperature smoke exhaust fan should be supported separately, and the weight of the duct is not allowed to be added to the fan parts. When installing the fire-fighting high-temperature smoke exhaust fan, pay attention to the horizontal position of the fan, and adjust the connection between the fan and the foundation and the air outlet pipeline to make it natural and consistent, and forced connection is not allowed. After the fan is installed, check the tightness around it, and pull the impeller by hand or lever to check whether it is too tight or friction, and whether there is anything that hinders the rotation. If there is any gap, it can be sealed with sunlight board or glass glue. The fire-fighting high-temperature smoke exhaust fan can only be put into trial operation after it is installed without any abnormal phenomena, and the exposed part of the fan transmission device should be protected. Check all parts of the fan regularly to ensure that the fan can be started and run normally at any time. The above are matters needing attention in the installation process of fire-fighting high-temperature smoke exhaust fan, and I hope it will be helpful for you to use this product. The company is willing to serve customers from all walks of life wholeheartedly with the best service quality.