The surface of ceramic tile is smooth, and walking after encountering water will have great safety hazards, and it is easy to slip and fall. The usual practice is:
First, the anti-skid mat is laid on the tile floor, but it is easy to hide dust, difficult to clean, short in service life, affecting the appearance, and it is completely a temporary solution.
Second, use non-slip floor tiles. Such as glazed tiles, whole-body bricks, etc. However, according to the sampling survey of anti-skid performance of ceramic enterprises in China in recent years, it is found that 95% of the tiles produced by ceramic enterprises are unqualified, and even some large enterprises and famous brands have a friction coefficient of only 0.4 and a small one of 0.2. However, the friction coefficient required by domestic and foreign safety standards is as small as 0.5 to be safe and qualified.
To sum up, the traditional two kinds of ground anti-skid treatment methods are difficult to meet the current needs of ground anti-skid treatment, because both of them belong to the products of the 1990s, which not only can not achieve real anti-skid, but also have shortcomings such as short service life and inconvenient construction. As the mainstream anti-skid product at present, the ground anti-skid agent can achieve real anti-skid compared with the above two kinds. It can not only prevent the ground from slipping, but also completely kill all kinds of bacteria caused by long-term contact with water. Completely put an end to all kinds of disadvantages of traditional anti-skid methods.
New anti-skid treatment agent for ground
The special agent for anti-skid treatment of ground in Di Hong is a kind of anti-skid product which has a huge gap with traditional products. The new polymer nano-infiltration technology is effectively and perfectly combined with the composite molecular cleaning and antifouling technology. After the anti-skid construction on the ground, nano-scale pores are opened on the surface of tiles or stones, and then new cleaning and anti-fouling technology is adopted, which can effectively reduce the surface covered by dirt. When the ground meets water, the pores will be filled with water. When the sole or sole passes through the ground, water will be squeezed out of the pores under pressure, which will make the pores in a vacuum state, inhibit the formation of water film, eliminate the lubrication effect of water film, enhance friction, and form a physical sucker effect when contacting the sole. Effective anti-skid effect can be obtained in dry operation and wet state. The anti-skid effect is improved several times after being exposed to water, oil and water, which reduces the risk that the floor tile is easy to slide down after being wet, and has the effect of "astringent when exposed to water", which makes the ground more anti-skid when wet than when dry, and the anti-skid effect is unparalleled.
Di Hong antiskid agent
Di Hong antiskid agent is a water-soluble liquid, made in Germany, with a 10 year warranty. This product is non-toxic, tasteless, colorless, transparent and non-corrosive, and will not change the appearance of floor tiles. It has a registered trademark and has passed the tests and certifications of many international organizations. Such as MSDS certificate certification, ISO900 1, ISO 1400 1 management system certification, etc. Dangerous goods that do not meet the requirements of the National Dangerous Goods Inspection Center and are verified by the Medical College to be harmless to health. According to the experience of the National Fire Bureau, it is non-flammable, non-dangerous, and internationally recognized as an efficient, broad-spectrum, fast, safe, non-residue and non-polluting anti-slip protection product.
Di Hong antiskid agent has super penetrating power, which can effectively penetrate into the capillary channels of floor tiles and stones. Through chemical reaction with glazed tile, vitrified brick, homogeneous brick, square brick, terrazzo, granite, cement floor, marble and other stone materials, the channel is widened, and the physical sucker effect can be formed when it comes into contact with the soles of feet in case of water or oil stains. The wetter the ground, the more obvious the effect, and it is safe for people to walk on it! Even if the surface part is worn later, the existing combination change part inside is stable and has a certain depth, so it can maintain a long-term anti-skid effect! Then rinse it with clear water, dry it naturally for 1-2 hours after the anti-skid treatment is completed, and keep it moist if necessary, and then use it.