charging item

1. Engineering design fee: generally including preliminary design and budgetary estimate, construction drawing design, cooperative construction stipulated in the contract, design technical disclosure, participation in trial operation, project completion acceptance and other expenses. This charging standard does not include the cost of making the construction drawing budget.

2. Pre-design work expenses: expenses for preparing feasibility study report, designing task book, participating in site selection and planning, and conducting environmental pre-assessment.

3. Design fee for non-standard equipment: refers to the design fee for non-standard equipment. In some industries, engineering design itself includes equipment design, so non-standard equipment design fees are not charged separately.

4. Software compilation fee: refers to the compilation fee of computer control programs in the production process of the factory. If there is no standard in the industry, it can be agreed by both parties according to the use value and advanced degree of the software and considering the actual workload of writing the software.

Second, the charging standard

1. When only the preliminary design or construction drawing design is entrusted, the charge shall be calculated by dividing the design workload by the proportion of the industry and multiplying it by the coefficient 1. 1. If the construction drawing budget is increased, the fee shall be calculated by multiplying the engineering design fee standard by the coefficient 1. 1.

2. Engineering design adopts standard design (except standard drawings) and reuse design, and similar new design projects are charged at 20%.

3. Engineering technical consulting services, technical services such as participation in planning and investigation, inquiry, quotation and foreign negotiation, and work without specific charging standards can be charged according to the number of days of employees of direct producers, and the charging standard is 85 yuan per working day. The calculation of working days can be based on the work task, based on the working day quota, or determined by the designer and the client through consultation when signing the contract. For tasks that need to travel to other places with a construction period of less than 60 days, the travel expenses shall be borne by the entrusting unit. When an engineering design unit needs to go abroad due to the tasks it undertakes, except for the manufacturing and installation expenses paid by the design unit, other expenses for going abroad (including foreign exchange quota) shall be paid by the entrusting unit.

4. In this charging standard, various adjustment factors affecting the design workload are considered. If two or more factors exist in the same project at the same time, the total adjustment coefficient of the project should be the sum of the decimal places of each single adjustment coefficient plus 1, but the maximum value of the total adjustment coefficient should not be greater than 1.5.

5. If the design fee is calculated according to the physical object or man-day quota, the project with an investment of more than 300 million yuan shall not be more than 0.5% of the estimated proportion of 65438.

6. The engineering design unit adopted advanced technology in the design and achieved good economic benefits. After the design review is confirmed, the higher-level competent review department may decide to appropriately increase the design fee, which is generally controlled within 10% of the design fee. If the design quality and technical level can not meet the requirements of the contract, the design fee shall be deducted according to the provisions of the contract.

7. The design fee shall be allocated by stages according to the design progress. After the design contract comes into effect, the entrusting party shall pay 20% of the design fee in advance to the design unit as a deposit; Pay 30% after the preliminary design is completed; Pay 50% after the construction drawing is completed. According to the Regulations on Construction Engineering Survey and Design Contracts, after the design contract is fulfilled, the down payment will be used as the design fee. After the design fee is paid, the design unit shall cooperate with the construction of the construction project that undertakes the design task, participate in the trial operation assessment and project completion acceptance, and shall not charge additional technical service fees and travel expenses.

8. For items not included in this charging standard, the design fee shall be determined by the design unit and the entrusting unit through consultation with reference to this charging standard. The design fees for foreign-funded and Sino-foreign joint venture construction projects may be determined by the designer and the entrusting party through consultation with reference to relevant foreign design fees.

9. If an architectural design scheme needs to be put forward separately, the architectural design scheme of super-class and first-class engineering shall be charged at 10% of the engineering design fee; 6% of the project design fee is added to the architectural design scheme of the secondary project; 3% of the project design fee is added to the architectural design scheme of the third-level project; There is no additional architectural design fee for projects below Grade 4 (including Grade 4). The "big" in the scale of civil construction projects generally refers to buildings of 1 10,000 square meters or more; "Medium-sized" refers to a building with an area of 3,000 to10,000 square meters; "Small" refers to buildings below 3000 square meters.

10, this charging standard has included the corresponding general fire protection system and architectural decoration design fees, and will be discussed separately if there are special requirements. When the existing building is specially decorated, it will be charged at 3-5% of the decoration cost according to the complexity of the decoration design.

1 1. This charging standard is based on individual projects, excluding the design of single buildings and structures such as gas, water intake, purification, sewage treatment, roads and bridges, boiler rooms, gas stations, power transformation and distribution stations, water pump houses, cooling towers and chimneys. , the charges should be implemented in accordance with the standards of municipal and other industries.

12. When only preliminary design of civil buildings or phased design of construction drawings are done, the workload ratio is 40% and 60%.

Provisions on the management of engineering survey and design fees

Ministry of Construction of State Planning Commission

Notice of the State Planning Commission and the Ministry of Construction on Issuing the Provisions on the Administration of Engineering Survey and Design Fees

Ji Jia [2002]No. 10

Relevant departments of the State Council, Planning Commission, Price Bureau and Construction Department of all provinces, autonomous regions and municipalities directly under the Central Government:

In order to implement the Notice of the General Office of the State Council on Forwarding Some Opinions of the Ministry of Construction and Other Departments on the System Reform of Engineering Survey and Design Units (Guo Ban Fa [1999]1KLOC-0/), adjust the charging standards of engineering survey and design, and standardize the charging behavior of engineering survey and design, the State Planning Commission and the Ministry of Construction have formulated the Regulations on the Management of Engineering Survey and Design Fees (hereinafter referred to as the Regulations). The Notice of the former State Price Bureau and the Ministry of Construction on Issuing the Charging Standards for Engineering Survey and Engineering Design ([1992] No.375) and its related annexes shall be abolished at the same time.

Before the implementation of the "Regulations", if more than 50% of the contract workload of construction project engineering survey or engineering design has been completed, the survey and design fees will still be implemented according to the original contract; If the workload of the completed engineering survey or engineering design contract is less than 50%, the survey and design fee for the unfinished part shall be determined by the employer, the surveyor and the designer through consultation with reference to regulations.

Annex: Regulations on Management of Engineering Survey and Design Fees

Attachment:

Provisions on the management of engineering survey and design fees

Article 1 In order to standardize the charging behavior of engineering survey and design, and safeguard the legitimate rights and interests of the employer, the surveyor and the designer, these Provisions, the charging standards for engineering survey and design are formulated in accordance with the Price Law of People's Republic of China (PRC) and relevant laws and regulations.

Article 2 These Provisions and the charging standards for engineering survey and engineering design shall apply to the charging for engineering survey and engineering design of construction projects in China.

Article 3 The contracting out and contracting of engineering survey and design shall follow the principles of openness, fairness, impartiality, voluntariness and good faith. According to "Bidding Law of People's Republic of China (PRC)" and "Regulations on Management of Survey and Design of Construction Projects", the Employer has the right to choose the surveyor and designer independently, and the surveyor and designer decide whether to accept the entrustment.

Article 4 The employer, the surveyor and the designer shall abide by the provisions of the relevant state laws and regulations on price, maintain the normal price order, and accept the supervision and management of the government price department.

Fifth engineering survey and engineering design fees according to the different situation of construction project investment, respectively, the implementation of government guidance price and market adjustment price. The total investment of the construction project is estimated to be more than 5 million yuan, and the engineering survey and engineering design fees are subject to government guidance prices; The fees for engineering survey and engineering design with an estimated total investment of less than 5 million yuan for construction projects shall be subject to market-adjusted prices.

Article 6 The benchmark price of engineering survey and engineering design fees subject to government guidance price shall be calculated according to the engineering survey fee standard or engineering design fee standard, and the fluctuation range shall be 20% unless otherwise stipulated in Article 7 of these Provisions. The employer, the surveyor and the designer shall, according to the actual situation of the construction project, negotiate and determine the amount of expenses within the specified floating range.

The fees for engineering survey and engineering design subject to market-regulated prices shall be determined by the employer, the surveyor and the designer through consultation.

Seventh engineering survey fees and engineering design fees, should reflect the principle of high quality and good price. If the fees for engineering survey and engineering design are subject to government guidance, and new technologies, new processes, new equipment and new materials are adopted for engineering survey and design, which is conducive to improving the economic, environmental and social benefits of the construction project, the employer, the surveyor and the designer may determine the amount of fees through consultation within the floating range of 25%.

Article 8 Survey and design personnel shall inform the Employer of the relevant service items, service contents, service quality, charging basis and charging standards in accordance with the provisions of clearly marked prices of goods and services.

Article 9 The amount and payment method of engineering survey fees and engineering design fees shall be agreed by the employer, the surveyor and the designer in the engineering survey contract or the engineering design contract.

Article 10 The survey documents or design documents provided by surveyors or designers shall conform to the engineering technical quality standards stipulated by the state, and meet the contents and quality requirements agreed in the contract.

Article 11 If the workload of engineering survey and engineering design increases or the engineering survey site is stopped or left idle due to the employer's reasons, the employer shall pay the corresponding engineering survey fee or engineering design fee to the surveyor and designer.

Twelfth engineering survey or engineering design quality can not meet the provisions of article tenth, the surveyor or designer shall rework. If the workload is increased due to rework, the Employer will not pay the engineering investigation fee or engineering design fee separately. If the fault of the surveyor or designer causes economic losses to the Employer, it shall be liable for compensation as agreed in the contract.

Thirteenth surveyors and designers shall not deceive the employer or collude with the employer to increase the workload of engineering survey or improve the engineering design standards. And overcharge the engineering investigation fee or engineering design fee.

Fourteenth in violation of these provisions and the provisions of the relevant state laws and regulations on price, the competent price department of the government shall be punished according to the "People's Republic of China (PRC) Price Law" and the "Provisions on Administrative Penalties for Price Violations".

Article 15 The State Development Planning Commission shall be responsible for the interpretation of these Provisions and the attached "engineering survey fees" and "engineering design fees".

Article 16 These Provisions shall come into force on March 1 2002.

Charge standard for engineering investigation