Current location - Recipe Complete Network - Catering training - Using the hotel decoration acceptance criteria to detect the hotel decoration
Using the hotel decoration acceptance criteria to detect the hotel decoration

Nowadays people often need to go out, choose the hotel is one of the necessary work before people go out to prepare, and everyone even if you go out, the pursuit of living comfort has never decayed, hotel decoration acceptance criteria when detecting a hotel renovation level of favorable credentials, then how to hotel decoration acceptance criteria according to the hotel renovation acceptance it? Can be detected from the following aspects: drainage function, tile laying, lamps and lanterns selection.

A, drainage function

Concealed or buried drains should be hidden before the irrigation test, irrigation height should not be lower than the top of the bottom sanitary facilities or the bottom ground. And to must be installed according to the design requirements and the location of expansion joints for drainage plastic pipe. If design is not required, the distance between expansion joints should not exceed 4 meters. In high-rise buildings, fire-resistant rings or fire-resistant casings should be provided for drainage plastic pipes according to the design requirements. Drainage main risers and horizontal mains need to be checked that they pass through the ball. The diameter of the ball is greater than 2/3 of the diameter of the drainage pipe, and the passage rate of the ball needs to be 100%. Drainage nozzles are pre-positioned and sized to meet the design requirements. To pay particular attention to the following three points:

1, waterproof materials have certificates and quality inspection reports

2, the choice of waterproof materials in line with market design requirements or mature products

3, water storage test after the completion of the water storage: the height of the floor drain is 100 mm, the ball plugs (or cotton balls) used to prevent leakage. Shallow water level of 50 mm, water storage time of 48 hours.

Two, tile laying

The brick type, pattern, color and performance must meet the design requirements. Decorative tile paste, waterproof glue and cement materials and construction design requirements in line with the current national acceptance criteria for hotel decoration product standards and technical methods, laying should be tight fit.

Three, lamps and lanterns selection

A hotel lighting effect can reflect the hotel grade, but also can give the guests point to different accommodation experience. Hotel decoration acceptance criteria for lighting models, styles, shell colors, bright colors have relevant counting requirements. The installation and electrical wiring of the lamps and lanterns should meet the design requirements and installation dimensions of the location regulations. And the lampshade and the ceiling or wall will be closely fit. At the same time to ensure that the light bulb can be turned on and off normally, the lighting angle in line with the design requirements.

Hotel decoration acceptance criteria are very complex, the above introduction is only a few of the points, the specific conduct should also be carefully and seriously, can not miss a detail.

Tuba Rabbit online free for everyone to provide "each decoration offer, 1-4 local decoration company, 3 sets of decoration design program", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get it for free Oh~