The range hood must be fixed directly on the wall. The normal installation method of range hood is to fix the range hood horizontally on the surface of concrete or brick wall with expansion bolts, but it cannot be directly fixed on the surface of non-bearing wall, let alone fixed on the box body. The range hood fixed on the cabinet must be removed and reinstalled. In addition, when installing the expansion pipe, the cooperation between the pipe hole and the drilling hole must be close, so as to avoid loosening the expansion pipe due to too many drilling holes and causing the machine to fall; When the range hood needs to be installed separately, the baffle in the attached accessories must be installed in place to prevent the machine from falling off.
A plastic bag is placed under it, and the particles that hit the wall are stuck with tape to prevent them from falling onto the table.
1. Drill 3- 10 hole in the wall with a depth of 50-55mm, bury 10 plastic expansion pipe, and then fix the hook (attachment) with wood screws.
2. Insert the smoke exhaust hose into the check valve assembly and fasten it with tapping screws.
3. After the whole machine is hoisted, align the two rectangular holes on the back wall with the hooks and hang them up, and then lead the smoke hose out of the room. Note that the outlet of the smoke hose should be lower than the room.
4. Install a M5x25 screw in the screw hole in the middle of the hanging plate, and tighten the screw to prevent the range hood from sliding, and the installation is complete.