What are the installation steps of crystal light box on the wall? First of all, cathode fluorescent lamps usually use cathode fluorescent lamps T4 or T5 wrapped in reflective films on both sides of a uniform plate. For ultra-thin light box with small light guide plate, manufacturers can be required to provide patch and straw hat LED hard light strips. And keep the position of ballast and lamp. Polishing the final surface of the homogenized plate. 3. Illuminate light on the light guide plate, add a transparent plexiglass panel, cover the outer frame and fix the frame to make the light guide plate ultra-thin. 4. Stick double-sided adhesive tape around the shading plate, and install a reflective film on one side of the shading plate. White PET reflective film is generally used as the reflective film, and high-gloss photographic paper can also be used. 5. Connect the ballast, and put the lamp, light pipe and ballast into the lower frame of the light box. The frame of the light box can be opened to replace the light bulb in the future. The frame can be made of aluminum alloy, wood, stainless steel, plastic, etc. Appearance according to your own preferences.
What should I pay attention to the crystal light box on the wall? 1. Pay attention to stability. The glass lamp has complex shape, many accessories and light weight. When installing, not only the bearing capacity of the upper surface should be considered, but also the stability of the backboard and lamp board should be considered. All kinds of screws used to fix glass lamps, especially the expansion screws of backrest strip and lamp plate, should be tightened. Be sure to tighten it completely to prevent the bulb from swinging. In addition, the bearing capacity of the nut bearing the whole lamp must match the total weight of the glass lamp, otherwise it will be reduced due to insufficient bearing capacity. 2. Pay attention to power failure. Be sure to disconnect any lamps and lanterns before installation, especially when connecting cables and installing light bulbs, so as to avoid electric shock and life safety. 3. Accessories should be light. Crystal balls or glass filaments in glass lamps are usually synthetic. Although the hardness is not as good as natural glass, it is not easy to use. However, if the accessory has a glass tube, special attention should be paid to the series connection and fixation. Be careful not to damage the glass tube. 4. Pay attention to height. Pay attention to the height of hanging glass lamp during installation. Because glass lamps usually have crystal pendants, these pendants will vertically extend the volume of the lamp. If the installation height is too low, you will not only feel pressure, but also the brightness of the lamp will be uncomfortable, and a pendant will be hung. There may still be security problems. Don't choose a pendant that is too long for decoration.
These are some questions about the crystal light box on the wall. Let's have a look.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~