1, light box material:? Keel: made of wood strips, angle iron or aluminum alloy profiles. ? Light source: two groups of fluorescent tubes. ? Panel: plexiglass color plate or pvc color plate. ? Support: triangular iron frame. ?
2. Common tools for light boxes:? Electric drill, cross screwdriver, screwdriver, hacksaw, wood saw, shovel hammer, pliers, nails, latex, hook knife, wire saw, plexiglass.
3. Key points of operation process:?
Design: According to the design requirements of customers, the size, color and font of light boxes should be arranged in primary and secondary order, and the changes of pictures and texts should be placed horizontally and vertically. In addition, it depends on the brackets made at the installation site. Based on this design, the size, font and color of each word are calculated and searched. ?
Keel: generally hexahedron.
Material: 20×20 or 30×30. ?
Angle iron: conditional self-processing, unconditional external processing. ?
Wood: 2×2 cm square timber is used for nail rack. ? Blanking: four pieces in length and four pieces in width, with length and width minus 0: 5cm = wood length. Saw 2× 1 tenon at both ends, paste it with white latex and nail it. Thickness dimension minus two material thicknesses +0: 5 = thickness length. Then put on white latex and nail it. ?
Aluminum material: the aluminum alloy material of the ground cabinet is the same height, width and length. Saw it at a 45-degree angle. Insert? A connection.
Lighting: Generally, two or three fluorescent tubes are used. ? 40W 1: 2m long lamp with light box 1: 3m or more. The length of 30W lamp tube is 0: 9m, which is used for light boxes above1:1m.. The thickness is generally 20-25 cm.