Current location - Recipe Complete Network - Complete cookbook - How to operate a uv printer
How to operate a uv printer
Pay attention to the correct method in the use of uv printers. It is not difficult to operate a uv printer. The pictures to be printed are imported into the computer, after processing, the media to be printed are cleaned and coated, and then the distance between the substrate and the nozzle is adjusted, so that the computer can control the printing. In order to make the uv printer print better and have a longer life, we need to pay attention to some matters and operating skills, such as environmental requirements, paying attention to dust prevention, choosing appropriate printing methods, and emptying ink cartridges regularly. Let's take a look at the operation process and operation skills of uv printer. First, how to operate the uv printer

Uv printers can print a variety of materials and are widely used. So how to use a uv printer? The following describes the operation process of the uv printer:

1. image processing: import the image to be printed into the computer, and simply process the image size by using software such as PS or CAD. It is recommended to be 2 pixels larger than the material size.

2. Material treatment: clean the surface of the material to be printed and wipe it with a clean soft cloth. Be careful not to wipe it back and forth to avoid scratching the material.

3. Spraying: Spraying a layer of coating on the surface of the material to increase the adhesion of ink and make the image complete, clear and beautiful.

4. Adjust the nozzle: adjust the distance between the nozzle of the uv printer and the substrate, and then control the printer to print by computer.

Second, what are the operating skills of uv tablet computers?

When using uv flat-panel printer, learning some operation skills can make the printing effect better and effectively prolong the service life of the printer. The operation skills of uv printer mainly include:

1, uv printers can't put other things that don't print.

2. There should be no common electrical appliances near the place where the uv printer is placed, and it should be away from large magnetic fields and electric fields.

3. Try to keep the temperature and humidity of the place where the uv printer is placed constant. The general temperature is about 25℃ and the humidity is about 60%.

There is dust in the room, so don't put it with dust-prone equipment.

5. Please do not use inferior printing media to avoid damaging the nozzle or burning the motherboard.

6, in the case of not affecting the work progress, try to use 8PASS mode to print, the damage to the nozzle is minimal.

7. When coating on the substrate, pay attention to uniform coating. You can buy a spray gun so that the sprayed coating will be more uniform.

8. Check and empty the waste ink in the waste ink box at least once a week to prevent overflow.

9. It is best to print the test paper before the end of the printing work every day to ensure that all nozzles can eject ink normally.

10, the uv printer must be grounded, and objects such as lightning rods, radiators and water pipes should not be connected.

1 1. If there are still broken lines or dotted lines after repeated cleaning, please wait 10 minutes before working. If you still can't clean all the spray holes for 5 consecutive times, please contact the manufacturer.