No matter in the process of outdoor advertising design and layout, or in the indoor layout of some retail stores selling mobile phones and computers, we will find many advertising light boxes. Generally speaking, they are advertising light boxes with good gloss, excellent color rendering ability and appropriate size. However, the specific publicity effect of this advertising light box in the later period depends on the previous production and installation process, including some steps and methods worth learning, which may be useful at key times.

A, light box production and installation process

Prepare materials

Keel: batten or angle iron; Light source: two groups of fluorescent tubes; Panel: plexiglass color plate or pvc color plate; Support: triangular iron frame.

Prepare tools

Electric drill, cross screwdriver, screwdriver, hacksaw, wood saw, shovel hammer, pliers, nails, latex, hook knife, wire saw, plexiglass.

installation procedure/program

Design support → blanking → welding press → fixing → installing light box.

Key points of production

First of all, the strength and bearing capacity of the main structure should be checked, and those that do not meet the design requirements should be handled in time. To install pretreatment parts, store decoration should be consolidated, so the pretreatment parts should be installed in advance according to the design requirements. When making a light box or pasting words, you must distinguish which side is next to the wall and which side is next to the wall to lead out the wires. It's raining up there, and going out on the other two sides is not nice.

Second, the advertising light box installation matters needing attention

Of course, the first problem to be considered in the installation process is the circuit problem. When installing the advertising light box, be sure not to leak water, otherwise it will leave a safety hazard. Workers who install advertising light boxes should wear gloves when operating, so as to avoid the sweat of palms sticking to the stainless steel surface, which is corrosive and will make the light box lose its original color and affect its appearance. Considering the aesthetic problem, the wires should be hidden and not exposed during installation. And be careful not to spend pictures of products when installing light boxes, because advertising light boxes have extremely high requirements for beauty. Plug in the power plug and turn on the main power switch to see if the light is normal. If there is a phenomenon that one side is on and the other side is off, please disconnect the power supply and unplug it first, and check whether the wire of the lamp holder is loose and the lamp tube is not in place. Whether the input and output lines of ballast are loose, etc.

The above example is about the methods and steps of making and installing light boxes. It can be seen that a suitable light box not only requires high specifications, but also learns steps and methods, materials and skills in the process of manufacturing and installation. For example, we should first pay attention to the corrosion resistance and impact resistance of the light box, and also pay attention to its color rendering ability. According to the style of light box application field and the division of indoor and outdoor areas, the processing skills that can be used are different.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~