2. Set RGB of foreground color to (240228220), create a new layer of 1, and pull two horizontal and vertical reference lines.
3. Select the ellipse marquee tool in the toolbox, hold down shift+Alt, place the mouse on the intersection of reference lines, and drag the mouse to create a circular selection. Press Alt+Delete to fill the foreground color, as shown in the following figure: (The following figure is taken from the teaching plan, and it is not colored, nor is it a true proportional relationship).
4. Press ctrl+D to cancel the selection, create a new layer 2 in the Layers panel, click the Elliptical Marquee Tool, hold down shift+Ait, and drag the mouse at the intersection of the reference lines to create a perfect circle selection.
5. Click the gradient tool in the toolbox, open the gradient editor in the tool options bar, and set the RGB value of the gradient to 0 (1/kloc-0, 80,34) and 100% (0, 180,1/). After setting, click the button, hold down the mouse and drag from the upper right corner of the selection to the lower left corner to create a gradient, and then adjust layer 2 to below layer 1 in the layer panel.
6. Press ctrl+D to cancel the selection, create a new layer 3 in the layer panel, adjust it to the bottom of layer 2, and create a perfect circle selection with the above method.
7. Select the gradient tool in the toolbox and edit the three-color gradient. The RGB color values are 0 (238, 190, 120), 50% (196,134,80) and 100% respectively.
8 .. press ctrl+D to cancel the selection, create a new layer 4 in the layer panel, adjust it to the bottom of layer 3, and continue to make circular selection with the above method.
9. Select the gradient fill tool in the toolbox and shift the RGB value of gradient fill to (222, 170,15) (245,210,165) (75,45,
10. Click Layer 2 in the Layers panel, and then execute Layer/Layer Style/Surface and Relief, Leaked Surface, Smoothing, Depth 100%, Direction, Size 5, Softening 0, Angle 60, Height 30 and other default values.
1 1. Click Layer 3 in the Layers panel to perform the layer/layer style/stroke, and set the RGB value of the color to (164, 138, 138) size 2, out of position. After setting the parameters, the effects are as follows: (Below are the bevel relief of layer 2 and the stroke effect of layer 3)
12. Click Layer 3 in the Layers panel to execute the Filter/Texture/Texture command.
13. Create a new Layer 5 in the Layers panel and adjust it to the top of Layer 4.
14. Select the Polygon tool in the toolbox, select the Fill Pixel option in the options bar, the number of sides is 60, click the drop-down arrow on the right side of the shape, select a star, indent it by 50%, and leave the rest blank.
15. Place the cursor on the intersection of reference lines and drag the mouse to create a polygonal star.
16. Click Layer 4 with Ctri key in the Layers panel to get the selection of Layer 4, deselect the selection, and then press Delete key to delete the pixels in the selection on Layer 5.
17. Execute the command of layer/layer style/slope and landform, and set the parameters: slope within the style, smoothing method, depth 100%, direction, size 0, softening 0, angle 30, height 30, and other defaults.
18. Select the gradient overlay option in the layer style to open the gradient editor dialog box. The three color levels are: 0 bit (222, 166, 123), 50% bit (255 255,239,214), 65438+. Click "OK".
19. Set the foreground color to white, create a new layer 6 in the layers panel, and adjust it to the top of the layer 1.
20. Hold down ctri key and click on the selection of layer 1 to get layer 1, and fill the foreground color on layer 6.
2 1. Press CTRI+D to cancel the selection, set the foreground color to black, and then create a new layer 7 in the layer panel.
22. Hide the reference line, select the straight line tool in the toolbox, click the Fill Pixel button in the options bar, set the thickness to "2 pixels", press and hold the shift key to draw two straight lines along the horizontal and vertical reference lines, copy Layer 7 as a copy of Layer 7, press ctrl+T to carry out free deformation operation, rotate the straight line of the copy of Layer 7 by 30 degrees, and repeat the above steps.
23. Merge the layers above Layer 7 into Layer 7, select the Oval Box Selection Tool in the toolbox, hold down shift+Ait to create a right circle selection centered on the focus of the reference line, and then press Delete to delete the image in the selection.
24. Press CTRI+D to cancel the selection, create 8 new layers in the Layers panel, use the option bar "Fill Pixel" of the Line Tool again, set the thickness to "1 pixel", hold down the shift key and draw two straight lines along the horizontal and vertical reference lines (upper left below), copy 8 layers, press ctrl+T, and rotate the option bar 6 degrees (upper right below) to obtain a copy of 8 layers. Double-click the plus sign T three times to copy a lot (bottom left), merge the line layers, use the elliptical marquee tool to hold down shift+Alt to create a perfect circular selection centered on the intersection of reference lines, and then press Delete to delete the pixels in the selection.
25. Set the foreground color to black, and draw a small proportion to fill the foreground color with the rectangle and ellipse marquee tools.
26. Create a new layer 10 in the layer panel, click the custom shape tool in the toolbox, select the "Fill Pixel" column, set the shape in the shape drop-down panel, drag the mouse to draw in the layer 10, then select the text tool to set the appropriate character font size, and enter "RADO" under the logo.
27. Create a new layer in the layer panel (1 1), click the ellipse box selection tool in the toolbox, draw a perfect circle in the center of the table, and fill in the RGB values (2 18, 172, 109) to realize the layer style/. After setting parameters, click OK. Draw the hour hand and minute hand in the same way and bend them.
28. Set the foreground RGB to (222, 193, 125) to create a new layer 12 in the layers panel, and jump the position of the layer to the bottom of layer 4.
29. Select the pen tool, draw the path, convert the road strength into the first selection, fill the foreground color, and cancel the selection.
30. Add a layer style to the layer 12 and select Gradient Overlay. The positions of gradient bars are 0%, 40%, 66%, 86%, 100%. The five RGB colors are (162,103,25), (230,2 10/0, 155), (2 15, 15) from left to right. Select a stroke, the color RGB value (2 15, 185,10), the stroke size is 3 pixels, the mode is normal, and the opacity is 100%. After setting the parameter number, click OK.
3 1. Continue to make other watch chains in the same way. Merge the corresponding layers, name the watch, open a background material, drag it into the file, under the watch layer, and finally type words in the upper left corner, make a selection for the words, and paste beautiful patterns.
I want to help others make a colorful poster of glasses and watches. Is the production process to make a picture with PS and print it out? Explain in detail! Create a new drawing paper with a resolution of 300 PPI and RGB mode, convert it to CMYK format after drawing, and correct the color. Just print it out.
Steps to make posters with ps 1. The first tool you need is PS. Click the PS software, and then click to create a new canvas.
2. After selecting the required size, we can drag the prepared basemap into the previously selected canvas.
3. Then roughly adjust it according to the size standard you need, and then you can pull the picture where we need to put it, and other redundant parts can be removed.
4. Then click the rectangle tool in the left toolbar and draw a box on the canvas, which can be used as a decorative font style sheet.
After it is finished, you can write some words you want to write in it, and then adjust the size and position.
6. Finally, use English fonts to match fonts. Why should English fonts be arranged? If it's just a big Chinese font, it may be a bit monotonous, so you can modify it appropriately.
This solves the problem of using PS as a poster.