Generally, the range hood of gas stove has been determined before the cabinet is installed, and the size of the range hood has been informed before the cabinet is made. From the installation point of view, it is easier to install the cigarette machine first. Compared with loading the cabinet first and then loading the cigarette machine, the installation of the cigarette machine is more difficult, but it is no problem. No, many cabinets are customized now. First, measure the size of the kitchen cabinets, leave space for natural gas cookers, and leave gas pipe holes for connecting gas stoves. You can install cabinets first, and then install gas stoves. If you choose a conventional single gas stove, you don't need to install the cooker first, the cabinet is not ready, and the cooker can't be installed. At least wait until the countertop is installed before installing the cooker, and the countertop also needs glass glue. Generally, it is required to wait for 48 hours for the glass glue to dry before installing stoves and appliances.

When installing the kitchen cabinet, the gas stove and sink need to be embedded, and these two things must be bought in advance for backup. At worst, you should know the size of the reserved gas stove and sink. The opening on the countertop of the kitchen cabinet should not be too large or too small, so as to avoid improper installation, affecting the appearance and inconvenient operation. If you buy something special at home, you need to tell the cabinet maker the size and let them open the table according to the size you bought. Please confirm the size design style, opening position and other related information with the cabinet installer in advance. It is recommended that you book the cooker in advance, but you don't have to install it. Before customizing the cabinet, you need the exact size of the cooker of the range hood, so that the best effect can be achieved after installation.

The best way is to call the workers of natural gas cookers to dock when installing cabinets. I bought an integrated stove at home, that is, I asked people on both sides to install cabinets and integrated stoves that day. They all install cabinets first, then stoves! The furnace holes on the quartz stone are basically dug on site! The cabinet will also reserve natural gas pipelines in advance. I usually use a 35-hole punch to open a hole! When designing, it should be selected, and then the designer will reserve the installation location. It is best to install them together when the manufacturer completes the installation. Otherwise, a little mistake will kill you.