1, this tutorial is made by photoshopCS5, and other versions are common. Open PS to create a standard 16 open horizontal document, and set specific parameters.

2. After creating a blank document, select Menu View->; New reference line "to set three folded reference lines.

3. According to the triple division and the size of bleeding, we built two reference lines (0.3cm, 2 1.3cm) horizontally and four reference lines (0.3cm, 9.8cm, 19.3cm, 28.8cm) vertically, and then selected the menu "View->; Lock Guides "to lock the guides. If the guide line is not displayed, you can choose the menu View->; Show->; Reference line ".

4. Next, we lay out the background. Graphic design is varied and there is no fixed pattern. Generally, the first three pages of a 30% discount are page 4, back cover and cover from left to right, and the last three pages are page 1, page 2 and page 3 from left to right. Generally, pages 1, 2 and 3 are all about publicity, and the design is relatively simple, and the front cover and back cover are also relatively simple. You can also use front and back cover designs. In this case, you will use the fourth page of the cover design, the back cover and the cover, which will make the picture look more atmospheric. First, design the cover page, open the original image 1, drag it into the document with the mobile tool to generate the layer 1, press Ctrl+T to transform freely, and adjust the size and position appropriately.

5. Then open the original Figure 2 and drag it into the document to generate Layer 2, and adjust the size and position appropriately.

6. Copy Layer 2 to generate a copy of Layer 2, and select Edit->; Transform->; Flip horizontally ",then press Ctrl+T to transform freely and adjust the size and position appropriately.

7. Click the brush selection tool, and set the foreground color to black. The brush size is about 400, the hardness is 0 and the opacity is 50%.

8. Add layer mask to the "Layer 2 Copy" and use the Set Brush tool to transition its edges.

9. Add layer mask to Layer 2, and also use a brush to transition its edge.

10. Drag the original Figure 2 into the document to generate Layer 3, and select the menu Edit->; Transform->; Flip horizontally ",then press Ctrl+T to transform freely and adjust the size and position appropriately.

1 1. Add layer mask to the third floor and erase the unused edges, so that the layout of the background is basically completed.

12. Open the original figure 3 and drag it into the document to generate layer 4, and adjust the position appropriately.

13. Add layer mask to Layer 4 and use a brush to transition the edge.

14. Continue to open the original figure 4, drag it to the document generation layer 5, press Ctrl+T to freely transform it, and flatten it properly to form a stereoscopic visual effect.

15. Set the layer blending mode of layer 5 to "positive overlay".

16. Similarly, open the original Figure 5 and drag it to the document generation layer 6. Place layer 6 below layer 5, set its layer blending mode to Brighten, and press Ctrl+T to adjust the size and position appropriately.

17. Click "Straight Text Tool" and select "Boyang Shu Hang 3500" as the font with a font size of about 96 points.

18. Click and enter the word "Wudang" in the document, and then select the menu "Layer->; Layer Style ",check" External Luminance "and" Bevel and Relief ",set the external luminosity appropriately, and set the specific parameters.

19. Set the font and size appropriately, enter the words "Promoting Chinese Wushu" and "Showing Chinese National Spirit" in the lower right corner of the homepage, and set the layer style "External Luminance".

20. After the basic design of the front cover is completed, design the back cover. Open the original image 6, drag it into the generated layer 7, set its layer blending mode to "positive overlay", and then place it in the upper right corner.

2 1. Set the font (for example, calligraphy with brush version 2.0) and size appropriately, input the words "Tai" and "Pole" respectively, and set the style of the outer luminescent layer.

22. Then enter the words "Wudang Mountain in Hubei, China" in the lower left corner of the back cover, and set the style of the outer luminescent layer.

23. Next, process page 4, that is, the leftmost page, open the original figure 7, drag it into the generated layer 8, and adjust the size and position appropriately.

24. Click to select the magic wand tool, set the tolerance to about 20, and uncheck "Continuous".

25. Click the gray position on the 8th floor (press Shift to cover the selection) until all parts except the text are selected.

26. Press Ctrl+Shift+I to reverse the selection, and then add layer mask to the 8th floor, so that you can get the approximate text content.

27. Click and select the layer mask of Layer 8, and erase some edge noise with a black brush.

28. You can copy the 8th floor to generate a copy of the 8th floor, select the seal part, and delete the rest after reverse selection.

29. click on the selected layer 8, and select the menu "layer->; Layer style->; Color Overlay ",set the overlay color to black.

30. Erase some variegated colors with the black brush tool, and then superimpose the color of the "eighth copy" in the same way, and set the superimposed color to red. In addition, you can also increase the external lighting style, in short, as needed.

Free design, by this time, the front of the three-fold in this example is basically completed. For publicity color pages, don't have too much text content, because few people will read the content carefully, so try your best.

Ps Tri-fold Making Tutorial Steps Operation Steps/Methods

1. Click the file in the upper left corner, and then click New.

2. Create a new 29 1 * 2 16mm white canvas with the color mode of CMYK.

3. Divide the canvas into three parts with reference lines, leaving one part on the left and one part on the right.

4. Use the rectangle tool to draw a rectangle in the middle and fill it with color.

5. Draw a rectangle on the left and right sides, and enter the text to be used.

6. According to the above steps, you can make a 30% discount.

Matters needing attention/summary

1. Use the guide line to divide the canvas into three parts. 2. Draw a rectangle on the left and right.

How to make a three-fold 1 ps and determine the size of the fold.

Open PS, fill in the size, and add the bleeding position to the filled size. Add 3MM deflation position on each side. For example, the width is 30CM, the actual filling is 30.6CM, the height is 20CM, and the actual filling is 20.6cm ... Remember that the unit is cm.

2. Determine the resolution of the hinge.

The print resolution of hinge is 300DPI, the number of inputs is 300, and the selection unit is: pixel/inch, which is the general resolution of printed output.

3. Determine the color mode of the hinge.

The color mode of printing is CMYK, not RGB, so you should choose CMYK mode when creating a new document.

4. Select View → Check (√ ruler) in the PS menu bar.

In the upper left corner, drag the ruler to the position of 3MM with the mouse, and then release the mouse, and you will see a blue line. After dragging the ruler to the position of 3MM on the left and upper side, the blue line will show a square area.

5, the other three Angle, in turn, drag out 3MM feet.

This is the printed bleeding line. The contents of the text and the main picture should not exceed this bleeding line position, and the parts other than the bleeding line should be cut off when printing.

6. Three folds are fixed to the position of each broken line.

For example, if a 30CM-wide fold is to be made into three folds, and each fold is 10CM, then we need to fix the position of 10CM, as shown in the figure. The positions of 10CM and 20CM are marked with blue lines, and the position of broken lines should be considered when designing text and picture contents.