It is best to use CDR. This picture is bigger. If you use PS, it may be a little stuck. Mode is CMYK mode. If you do it with CDR, you don't need to set the resolution, because it is vector software and there is no resolution. If you export JPG, you can set the resolution to about 35. Similarly, if it is made of PS, the resolution is about 35, and the mode is CMYK mode. The size of bleeding means that the edge of printing should be cut off, and ink-jet printing does not need to be cut off or kept, but generally for the sake of beauty, the patterns and schemes will not be pushed to the edge when making, and the upper and lower characters are 5 cm away from the edge, so just keep them at will according to your content.