Don't use the wall when adjusting the lights in Pacific Auto Network. Drive the car on a flat road. Adjust the low beam to a distance of 30 meters, and the two points overlap. Just adjust the high beam parallel to the ground. Use the wall to adjust the two far beams to be parallel.

Vehicle lighting adjustment is usually around the low beam. From the knob behind the headlight assembly, the owner can adjust the lighting by himself through tools.

Specific operation method:

1, park the car 7.6 meters away from the front of the car and the wall, and ensure that the ground is level and the car is vertical to the wall.

2. Measure the height from the ground to the center of the headlamp, and measure the distance between two headlamps.

3. Stick a horizontal masking tape on the wall 0. 1 m lower than the headlight to ensure that the tape is in the center of the front of the car.

4. Adjust the vertical adjustment screw until the headlight beam is in the middle of the adhesive tape.

5. Continue to adjust the vertical adjustment screw until the headlight beam goes straight. In order to ensure the correctness of the adjustment, measure the height of the beam on the wall and the height of the headlight to ensure that the two values are equal.

(Photo/Text/Photo: Pacific Auto Network Qi Song He)