Lead: In the process of wall decoration, wallpaper is the most frequently used material, which not only makes the wall look more beautiful, but also has a wide variety. Different types of wallpaper can shape different styles of rooms, and pasting wallpaper can also protect the wall. Although we often see wallpaper on the wall as a way of wall decoration, we don't know much about the steps of wallpaper. The following details the five steps of Bian Xiao wallpaper pasting.

What are the steps for pasting wallpaper?

The first step of wallpaper pasting, wall treatment:

Use scraper and sandpaper to remove impurities and floating soil on the wall surface, and use gypsum powder to repair and smooth the cracks in the concave hole. If the wall is soft or has a powder layer, you should brush wallpaper glue to make the wall firm first, so that the wallpaper will not fall off.

Step 2: Cut the wallpaper:

1, measure the length and width of the wall after leveling.

2. Cut the wallpaper after calculating the wall area. Note that the length of wallpaper must be 5cm longer than that under the wall before trimming.

3. For floral wallpaper, the symmetry of the pattern should be considered, so the cutting length should be appropriately increased according to the unit length of pattern repetition.

The third step of wallpaper pasting: brush the basement membrane and scrape it clean;

Brush? Basement film: brush the basement film evenly on the wall with moderate thickness; Scraping putty and polishing. Carry out two batches of wall scraping putty. After the putty is dry, use sandpaper to polish off the uneven particles on the wall surface to make the wall surface smooth and flat; ? Brush the wall (finish) evenly with the basement membrane, not too thick. This can prevent the wall from absorbing the wallpaper glue, so that the wallpaper can be firmly adhered to the wall and the wall is smoother.

Step 4 of wallpaper pasting: Play vertical or horizontal lines:

Firstly, according to the width of the wallpaper, frame the indoor front to the indoor dead corner. The external angle should be wrapped (plastic external angle can be used), and the internal angle should overlap. Play vertical or horizontal lines according to the framing diagram as the baseline for wallpaper pasting.

The fifth step of wallpaper pasting, bubble treatment:

If bubbles are found on the surface of the wallpaper after drying, cut the wallpaper with a knife, inject glue and flatten it to eliminate it.

Conclusion: Through the above introduction, I believe everyone has a certain understanding of the five steps of pasting wallpaper. Although the operation is relatively simple compared with other wall decoration materials, if there is a problem in the process of pasting wallpaper, it will greatly affect the effect of the wall. Bian Xiao recommended here, everyone must fully understand the steps of pasting wallpaper, and then paste wallpaper to prevent improper operation from causing mistakes in wall decoration effect. I hope that the above introduction can help you understand the five steps of pasting wallpaper.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~