1. When measuring and drilling thick rods, make sure that all holes are flush. There are two holes drilled at both ends of the stick, one large and one small.

2. Sandpaper the edge of the hole.

3. Pass the thin stick through the hole drilled by the thick stick, so that the four sticks become a square.

4. Fix the four intersections of thick and thin rods with screws.

5. A rope passes through the small holes at both ends of a thick wooden stick, and both ends of the rope are tied and hung.

6. Fix it on the thick stick with 10 long blue thread. (as shown in the figure below)

7. Start knitting the rope. (as shown in the figure below)

8. After weaving the rope to a length longer than the second stick, fix the rope on the second thick stick. (as shown in the figure below)

9. Cut two long thick white ropes. Take off the blue rope that has been fixed on the first thick stick.

10. Pass a white thick rope through the small hole of the remaining thick wooden stick and tie both ends of the rope. (as shown in the figure below)

1 1. Cut two long ropes and fix them in the small holes of two thick woven sticks. The two ends of the rope pass through the two holes of two corresponding thick wooden sticks and are tied together.

12. Before two ropes pass through the second hole, tie the rope on the third thick stick and fix it, and then pull the rope down and pass through the second hole. (as shown in the figure below)

13. After fixing two thick white ropes, if the lengths are different, adjust the ropes until they are the same. The following figure is the final image of the hanging chair.