What is the material for inkjet printing? 1. Self-adhesive backing paper: Ink-jet paper with a sticky substance on the back, which is light in weight and good in viscosity, and is often used for ink-jet printing of various indoor advertisements and exhibition boards. 2.PP glue: the commonly used material for inkjet posters is fine glue, which has high definition and no glue surface on the back. Users can stick it with double-sided tape. 3. Photographic paper: The materials often used for indoor painting posters and photos are exquisite photographic paper with high definition and no glue surface on the back, which is basically similar to that of a photo studio. 4. Light box: the material commonly used for light box painting, with exquisite painting and good light transmission. There are two common types: rear spray light box and front spray light box. 5. Removable adhesive: Also known as water-based PVC adhesive, it is different from ordinary adhesive in that it will not damage the surface of advertising floor and is easy to remove later. 6, transparent glue: alias water-based PVC transparent glue, commonly used in shop windows, shopping malls, glass doors, etc. There are both transparent and matte effects. 7. canvas: smooth and smooth, with good fabric. Often used in more romantic and elegant exhibition places, with a certain sense of oil painting. 8. Silk cloth: silk is used as the raw material, with soft texture, bright color, high surface particle density and strong three-dimensional effect. What are the materials of the light box? Aluminum alloy is the most commonly used material for making lamps. Usually, I often hear that lamps should be turned on, and aluminum alloy should be pressed after turning on. There are zinc alloys: but the cost of aluminum alloys is relatively high, and some lamp structures with low material requirements can be replaced by zinc alloys. Its mass is slightly heavier, but its cost is relatively cheap. There are also steel plates: steel is also a very common material in lamps, which is widely used and much cheaper than aluminum, and plastic: plastic is just a general term, including many kinds, such as PC and PMMA, which are common at ordinary times. It's a polymer. Mirror aluminum mirror aluminum material is unique in the lighting industry, and other products are rarely used. What material is the poster posted outdoors? Posters posted outdoors are made of adhesive.

Self-adhesive, also known as self-adhesive label material, is a composite material with paper, film or special material as fabric, adhesive coated on the back and silicon-coated protective paper as backing paper.

There are many coating technologies, which lead to the formation of different grades of self-adhesive materials. The development direction is from traditional roll coating, blade coating to high-pressure tape casting coating, which can ensure the uniformity and sensitivity of coating to the maximum extent, avoid the generation of bubbles and pinholes and ensure the coating quality. However, the casting coating technology is not mature in China, and the traditional roller coating method is mainly used in China.

Self-adhesive is a multi-channel advertising material, which is widely used in advertising industry. With the best combination of instant sticker engraving machine, the carved products are widely used in many aspects, such as light box, signboard production (mounting), car body advertising production, permanent signs, signs, computer cutting patterns, window patterns, display board production and so on.

Extended data

Problems needing attention when selecting:

1. For cylindrical bottles, especially those with a diameter less than 30MM, the materials should be carefully selected.

2. If the label size is too large or too small, pay attention to the actual test.

3. If the object to be pasted has an irregular surface, even a spherical surface, there are special considerations for the label material type, thickness and adhesive.

4. Some rough surfaces such as corrugated boxes will affect labeling, and the varnish on the surface of corrugated boxes will also have an impact.

5, automatic labeling machine labeling, labeling test can be carried out when necessary.

6. Even if the label indicates normal temperature, pay attention to whether the export experiences high temperature during transportation and use.

7. Too much water or oil will affect the characteristics of the adhesive. Pay attention to the environment and temperature of labeling.

8. Plasticizers sometimes ooze from the surface of soft PVC, so special attention should be paid to selecting suitable adhesives.

Reference source

:-Adhesive