Simple method of making styrofoam with clay.
There are many ways to make styrofoam, such as clay, glue or white glue. Here's how to make styrofoam with clay:
1. First, add clay to the container, and then add water to melt it.
2. After melting, add the pigment of your favorite color.
3. Add hand sanitizer and mix well.
4. Then, add foam to continue stirring and molding, and add it if it is not enough.
5. Then continue to stir, which will take some time.
6. You can get started after stirring and molding, so that the styrofoam is successful.
Precautions:
1. Be careful not to let the glue get on your hands during the process;
Be careful not to eat.
3. Liquid gel+shower gel+shampoo+glycerin+molding water or liquid gel+facial cleanser+foam hand sanitizer stock solution+glycerin+molding water. The styrofoam made by this method is also very effective.
4. When making styrofoam, the ratio of water to rubber should be kept around 1: 2 for the first time, and then we add materials with foaming effect and stir. When it is almost finished, borax can be added for the final curing treatment. At this time, if the styrofoam is hard, additional water can be added.
Self-made styrofoam does not need glue, and the foaming effect is not bad! No borax!
What household materials can be added with clay to make styrofoam?
First, add clay to the container, and then add water to melt it.
After it melts, we add pigments of our favorite colors.
Add our usual hand sanitizer and mix well.
Then add foam to continue stirring and molding, and then add it if it is not enough.
Then continue to stir and stir, which will take some time.
After stirring and molding, you can get started, so that styrofoam is successful.
Using ultra-light clay as styrofoam
Styrofoam can be made without glue. How to make styrofoam?
Styrofoam can be made without glue, and laundry detergent can also be made into hands. Let's have a look. First we take out a smaller container, and then we put shampoo in it. This shampoo is really mini, then add a little self-adhesive, and finally squeeze a little hand sanitizer to adjust your favorite color. Maruko purple is pink. Stir thoroughly and evenly. Finally, add shaving foam. You can add more shaving foam. Next, stir well and it looks like whipped cream.
While stirring, add a small amount of makeup remover several times, and stir until it is so viscous that our mud is almost ready. The finished mud is so soft when pressed with a spoon that it won't touch your hands at all. Stretchability is not very good. Next, we take a small box and put the freshly made mud in it. As you can see, it happens to be a small box of mud. Let's try foaming.
How to make bubble gum without glue and clay?
I don't know. Apologize
How to make styrofoam? No borax, no glue, no eye care solution, no soda, no clay. How to make styrofoam?
How to make styrofoam? How to make styrofoam without tension yarn, glue, eye protection liquid, comb and clay? You said that if you want a lot of styrofoam, even a small amount, you can try to buy it directly online. For example, it can be collected from Taobao. I don't know what project you will do.
How to make bubble gum with clay
First, add clay to the container, and then add water to melt it. After it melts, we add pigments of our favorite colors. Add our usual hand sanitizer and mix well. Then add foam to continue stirring and molding, and then add it if it is not enough. Then continue to stir and stir, which will take some time. After stirring and molding, you can get started, so that styrofoam is successful.
What material can ordinary crystal add to become foamed cement?
Ordinary crystals need to be added with liquid glue, glycerin and shower gel to become foamed cement. You need to stretch the styrofoam by hand for about two or three minutes until the styrofoam is not so transparent. Stretch it in the same way, and you will find cream lines in styrofoam.
The main reason why styrofoam is silent is that the proportion of water and glue in styrofoam is unbalanced. In order to make styrofoam sound, it is necessary to balance the ratio of water and glue. The ratio of water to glue is about 1: 2, so if there is no sound when squeezing styrofoam, add a little water or glue to balance the ratio of water and glue.
In addition to the unbalanced ratio of water and glue in styrofoam, there is actually a very important reason that styrofoam will lose its sound when pinched.
The use of styrofoam is introduced as follows:
If it's because styrofoam has been used for too long, some glue, glycerin, etc. Should be added to styrofoam to make styrofoam sound. Some people want to make their own styrofoam, and they are curious that detergent and salt can become styrofoam. In fact, if they are mixed in proportion, they can become styrofoam.
In fact, there are many ways for styrofoam to make sound when you pinch it. For example, you can add some cotton to the foam, which will make the foam much softer. However, it is very important to pay attention to the fact that there should not be too much cotton in the foam glue, otherwise the foam will be too soft. This will cause the styrofoam to break very easily.
There is no sand, boron and glue to make styrofoam, which is commonly used at home, and there is no ultra-light clay.
Slime has never heard of making white sugar. Use clay instead of glue. Do not use ultra-light clay, just use clay instead. Then contact lens care solution and baking soda can be added to borax water. Baking soda is slow to react and may appear once every two days. Baking soda is not enough if there is no contact with nursing solution. If there is no contact lens care solution, use saline, but saline is not very successful.
Send you a course of cotton mud.
Glue, water, shaving foam, foam hand sanitizer and contact lens care solution, baking soda is formed.