Learning to fish first learn to drift, this is a lot of fishing enthusiasts just learn to fish, the old fishing friends of the new fishing friends of the introduction, but a lot of fishing friends on the drift is a headache, then, fishing how to adjust the drift? Below with me to see it.

Fishing how to adjust the drift

1, the first step of fishing drift: adjusted to adjust the eye

Add the large pendant, gravity is slightly greater than the buoyancy of the drift. Then, put the rod into the nest, while constantly adjusting the length of the water line (the distance from the drift to the 8-ring), if the drift is plunged into the water can not be seen, it means that the water line is short, to lengthen until the drift is exposed to the water, how much is not limited.

Move the drift down by two distances, that is, shorten the water line by about 30-50 centimeters, to make sure the drift is off the bottom. Then cut the way the big drop a little bit of trimming to reduce the weight (you can cut more at the beginning, when the drift began to slow down the sinking, you have to cut the big drop), so that the drift in the double hook off the bottom (half water), the drift eyes exposed to the water surface 5 (or 4) eyes. In this way, the adjustment will be adjusted, which is called? Adjust 5 or 4?

2, fishing drift second step: adjusting the fishing eyes to find the bottom

Adjust? The second step is to adjust the fishing aim and to find the bottom. Finding the bottom plus more than the floating force of the pendant (can be rubber, lead, bait), under normal circumstances, to add the normal size of the bait on the hook to adjust the drift is appropriate. At this time, the drift should be due to the weight and submerged in the water, at this time, to lengthen the water line, step by step, until the double hook touch the bottom of the drift to show 1 - 5 eyes. This is called? Fishing 1 - 5? The first thing you need to do is to make sure that you have a good understanding of what you are doing and how you are doing it.

That is, do not hook, direct drift. In the case of no hook, the position of the adjustment, is your most blunt point; hang down the hook, hang on the bait, the number of eyes exposed, is your most spiritual point. Between the bluntest point and the smartest point, you have all the fishing spots.

Step 1: Half water without hooks to find the number of eyes

Cut off the double hooks of the original fishing group, no hooks to adjust the half-water, look at the number of eyes, this number of eyes is the following need to look for the most obtuse point of the number of eyes. (Assuming this is 11 eyes).

Step 2: Find the dullest point with hooks and no bait

Find the dullest point. Hooked to find the bottom, has been found in half-water without a hook position (11 mesh), then do not force the push, this mesh is the most blunt point, with space beans fixed mark. (Maybe 9 mesh has been hooked to the end, this time continue to push up, until 11 mesh)

Step 3: Half-water with hooks hanging bait to find the number of mesh

With double bait half-water drifting, look at the number of mesh at this time, this number of mesh is the following to look for the number of mesh of the most flexible point.

Step 4: Hang the bait with the hook to find the most flexible point.

How to use the float

1, float and line with; large line with small float. Although enough spirit but also a lot of miscellaneous signals, must not be desirable. Small line with a large float to be a lot better, but because the float is large, lead more bait naturally fall fast (fast fishing bottom fish is a good choice), but the bait falls fast many times will lose to do three-dimensional nest lure fish and bait falls to lure fish the perfect time. So it's best to match the size of the line with the size of the float.

2, the relationship between the float and the hook; many times we pay attention to adjust a few fishing a few, I think it is more critical to find out how many eyes you can use the hook to press the visual mark. Knowing a single hook can pressure a few floats and then adjust the fishing is much simpler, when the float is abnormal according to the hook and the relationship between the visual standard you can judge is the water flow, bait or fish in the mess.

3, line with the change of the float;? The first thing you need to do is to get a good look at the color of the water and the color of the water. The situation is changing rapidly, frequent change of float is more troublesome, simple adjustment of the length of the sub-line, to make up for the lack of float is not a good way. If you want to fish the interface, you can extend the subline (pendant upward). If you want to fish the interface, you can lengthen the subline (the drop is longer up).

Techniques for adjusting the float

1, adjust the high eye, you can clearly know the state of the bait.

Summer carp fishing is with bait, adjust eight eyes fishing three eyes, when the bait in the water after all the floating will automatically leak out eight eyes, so we know that there is no bait, can be timely after the rod to change the bait. If the lead drop to the bottom, you do not know what state the bait is in the bottom of the water. You can only guess or estimate, so will not drift people, fish catch certainly less, as well as running fish more.

2. Fishing three eyes, you can know the process of carp eating bait.