Current location - Recipe Complete Network - Complete recipe book - Come and take a look at the design of pigeon breeding greenhouses
Come and take a look at the design of pigeon breeding greenhouses

1. Single-row bungalows, each one is 5-5.2 meters wide and 12-18 meters long. The eaves are 2.5 meters high, and the house is divided into 4-6 small rooms with nets or bamboo wood. Each room can raise 50 pairs of squabs.

2. Front and rear windows should be opened on the front and rear walls of each pigeon house. The front window can be lower than the ground. The window room area is 1.2-1.4 square meters, and the front window is 1-1.2 meters above the ground. To facilitate the entry of summer wind into the house; the rear window is generally 1.6-1.8 meters away from the ground to avoid the invasion of north wind in winter.

3. At the same time, several floor windows (size 40 cm × 60 cm or 40 cm × 40 cm) that can be opened and closed should be opened under the back wall about 20 cm from the ground to facilitate Ventilated and breathable during summer and humid weather. The floor inside the house is preferably made of large red bricks or triple soil. It is required that the floor be smooth and clean, and that no water will leak out in humid weather. The ground is 30-40 cm higher than the sports ground to keep the habitat dry.

4. In addition, a sports ground should be set up on the sunny side of each pigeon house. Its length and width are similar to those of the pigeon house. The surrounding height is 2.5-2.8 meters. It can be made of steel, logs or cement columns and It is enclosed by galvanized lead wire mesh and covered with nylon mesh on top. For ease of operation and management, the door position of the sports ground should be consistent with the door of the pigeon house.