Current location - Recipe Complete Network - Complete recipe book - What are the exact steps to tie a crab?
What are the exact steps to tie a crab?

First fix the crab legs. Then use the wet rope wrapped horizontally two or three times, and then vertically wrapped two or three times, tie a knot, the crab is tied, the specific steps are as follows:

1, we have to press the crab, do not allow it to move, so as to play a role in fixing the crab, otherwise you will not be able to handle it, especially the 8 small claws, strong.

2, and then the crab's 8 small claws like the center close together, see the picture below. This operation is all based on pressing the crab.

3, next the rope line was wetted with water.

4, the rope line will be tied across the crab, first tied a circle, the end of the rope in the left hand of the index finger and the middle point to point fixed.

5, again wrapped horizontally around the crab in a circle. When winding, the left hand are not to send, must be firmly fixed crab, winding must be the big pincers and 8 claws should be wrapped.

6, the line from the end of the horizontal line through the bottom, vertical winding, this time you can also pick up the crab for winding.

7. Wrap it vertically again and tie a knot.

8, so the crab is tied.

Note:

The hairy crabs can be soaked in hot water at 45 degrees Celsius for about 10 minutes to get them into the hot water, and then washed normally after fainting. Hairy crabs can also be soaked in cooking wine or white wine for about 20 minutes to allow them to swoon and then clean them normally. You can also chill hairy crabs in the refrigerator for about 20 minutes. Crabs go into hibernation when they are cold and stop moving altogether. You can then clean them normally.