1, the panel can't be connected, which leads to the analysis of broken or residual boards. This situation is usually caused by the gap between the rollers. When the plate breaks, the gap between the rollers of the lower group may be reduced, or the gap between the rollers of the upper group may be increased. When the plate has a surplus, the adjustment method is just the opposite.

2. The uneven thickness of the running edge or both sides is caused by the inconsistent gap between the two ends of the roller. It can be solved by properly adjusting the gap between the two ends of the drum and adjusting it evenly.

3. Noodles are wavy, which is caused by the too large installation angle of scraper and knife comb, and can be solved by proper adjustment.

4. The phenomenon that the panel sticks to the roller is generally caused by too much moisture in the dough blank, and another factor is that the scraper bolt is loose.

5. Noodles can't be broken during processing, mainly because the cutting edge of the section is inconsistent with the bottom plate, which can be solved by adjusting the position properly.

6. The noodles are broken because there are impurities in the noodles, or it may be caused by the unevenness of the noodles.

Fault maintenance of noodle machine

Fault: After power on, start the switch and the noodle maker will not work.

The power cord is not plugged in. Check the power cord socket to see if it is in place.

Motor continuous working time is too long, automatic power-off protection. Wait for the noodle maker to cool for 20 minutes before using it.

The charging barrel and the mixing cup cover are not installed properly; Check whether the charging bucket and mixing cup are installed in place.

Fault: the indicator light is on and the dough making machine does not work.

If the operation key is not pressed, select the corresponding function key and press it to start the machine.

The noodle machine is broken and needs to be sent to Jiuyang after-sales service center for repair.

Fault: Stop the machine when coming out.

Incorrect mixing of ingredients leads to overload, flameout and shutdown; Need to be in strict accordance with the "volume ratio table" to add processing materials, too dry can add a small amount of water, continue to stir into flour floc, and then choose "manual" to continue to work. If it is too wet, add flour properly, then stir it into flour wadding, and select "Manually come out" to continue processing.

Foreign matter is mixed in the flour, which leads to overload stall and shutdown; Disconnect the power supply immediately and clean up foreign objects.

Click temperature control protection; Please stop the machine for about half an hour before using it.

Fault: The key is not responding.

The power outage interval is short and the system is not reset; It must be powered off for 3 minutes before it can continue to be used.

The noodle machine is executing the program; This is a normal phenomenon.

The noodle manufacturer itself failed; Unplug the power supply and send it to Jiuyang after-sales service center for repair.

Trouble: Noodles break easily.

Failing to use flour grade as required; Please choose flour above medium gluten, and it is best to use flour special for noodles.

The proportion of surface water is not suitable, and there is too little water; According to the random distribution of measuring cups and water cups, flour wadding is processed.

Trouble: Noodles stick together.

The ratio of flour to water is not suitable, and there is too much water, which leads to too thin. It is necessary to add materials to make flour wadding according to the distributed component cups and water cups.

Trouble: There is too much flour left in the mixing cup.

The voltage is too low; You can choose a home voltage regulator to use together.

The die hole is blocked and needs to be cleaned in time to ensure smooth flow.

The proportion of ingredients is wrong, and materials must be added in strict accordance with the capacity ratio table.

Fault: acousto-optic alarm

The noodle machine is blocked; Clean the cup body in time and check whether there is any foreign body blockage. Add materials in strict accordance with the volume ratio.

Matters needing attention in the use of noodle machine

Automatic noodle machine is a safe and efficient noodle processing machine, which produces noodles with uniform thickness and delicious tendons, and is widely used in canteens, restaurants and noodle processing plants. When using the noodle machine, you need to run the empty machine first to check whether there is any abnormal sound. If the idle speed is normal, it can be used. Before starting the machine, check whether there are impurities on the roller and the cutter, and the operator should keep a safe distance between his hands and the roller when delivering the noodles.

Please stop the machine and cut off the power supply after use. Clean up the accumulated surfaces on the machine. Do not scrape the drum and noodle knife with sharp metal objects, and lubricate the machine. The grease in the bearing should be replaced 1 time every year. Check the tightness and wear of the belt regularly. If replacement is needed, replace the new belt in time. Coat the surfaces of two rollers and noodle knife with edible oil for a long time to prevent rust.