Installation instructions:
1. If the computer system can't start, you need to use another available computer to make a cabbage USB flash drive.
2. If the running memory is 2G or lower, please install a 32-bit (x86) system; If the memory is 4G or higher, please install a 64-bit (x64) system.
3. If the operating system is larger than 4G and cannot be loaded into the USB flash drive, please refer to the solution that the USB flash drive system cannot be loaded with images above 4G.
Related reading:
Progress of uefi Loading System for Chinese Cabbage
How to install non-ghost system with Chinese cabbage
The method of pe backing up the desktop data of disk C when the system crashes.
I. Preparatory work
1. system download: ghostwin732-bit flagship pure version V205438+09.38+0.
2, 4G and above U disk: How to make U disk startup disk with Chinese cabbage?
Second, U disk startup settings: Chinese cabbage U disk installation system settings U disk startup tutorial (including BIOS settings)
Three, Chinese cabbage installation system steps are as follows
1. Make a Chinese cabbage startup disk according to the above tutorial, and then copy the downloaded system iso file directly to the GHO directory of the U disk;
2. Insert the usb boot disk of Chinese cabbage into the USB interface of the computer that needs to install the system. After restarting, continue to press the shortcut key such as F 12 or F 1 1 or Esc to open the startup menu, and select the USB option to enter, such as GeneralUDisk5.00. For computers that do not support these startup keys, check the second point to set the USB startup mode.
3. Enter this interface after booting from the USB flash drive, and select the 02 option through the direction key to enter, or directly press the number key 2 to start the pe system. If you can't get in, choose 03 old PE system;
4. After entering the pe system, you can directly execute Step 6 without completely repartitioning. If you need to re-partition, you need to back up all the data, then double-click to open the DG partition tool, right-click the hard disk, and select Quick Partition.
5. Set the number and size of partitions. It is generally recommended to drive C above 50G. If it is a solid state drive, check "Align Partition" for 4k alignment, and sector 2048 is enough. Click OK to perform the hard disk partition process.
6. After the hard disk partition, open the cabbage and install it with one button, and the mirror path selection system is iso mirror. At this time, the gho file will be automatically extracted, and click the drop-down box to select the gho file;
7. Then click "Recovery Partition" and select the installation location of the system, usually drive C. If the drive letter under pe is not displayed, you can select it according to "Volume Label" or disk size, and click OK;
8. At this time, a prompt box pops up, check "Restart after completion" and "Boot repair", and click Yes to execute the system installation process;
9. Enter this interface and perform the operation of installing the system to drive C. This process takes about 5 minutes, so just wait patiently.
10. After the operation is completed, the computer will automatically restart. At this time, pull out the U disk startup disk of Chinese cabbage, and it will automatically restart and enter this interface to perform the process of installing system driver, system configuration and activation.
1 1. The installation process takes about 5- 10 minutes. Finally, restart to enter the new system desktop, and the installation process of Chinese cabbage is over.
This is a detailed course of Chinese cabbage loading system. After the USB flash drive is set up, the following installation steps are introduced above.