To get the film, you need to confirm the winding direction of the film, find the counterclockwise direction, and put it on the film rod for fixing. (Please turn off the power supply when threading the adhesive film) Pay attention to whether the fixing splint before and after the adhesive film is closely combined with the adhesive film. If it cannot be closely combined, it is necessary to cut the inner side of the adhesive film paper tube with a utility knife and put it in again. 　

After putting on the adhesive film, stick the adhesive film firmly on the receiving paper tube with adhesive tape.

Step 2: Sealing operation steps (panel operation instructions)

Turn on the power supply, turn on the power switch, and the indicator will light up. Set the thermostat to a predetermined temperature, and the green heating indicator will light up. After the upper hot plate reaches the predetermined temperature, the red constant temperature indicator lights up (when the sealing machine is working, the electric heating device is constantly alternating between heating and heat preservation, so the green and red indicator lights are constantly alternating, which is a normal phenomenon). 　

Put the plastic cup into the lower die slide plate, push the lower die slide plate to a certain position by hand (if it is a full-automatic sealing machine or an automatic sealing machine, the lower die slide plate will automatically enter after the plastic cup is put in), press down the handle of the sealing machine to the maximum stroke, hold the pressure for 1~2 seconds, then slowly raise the handle and push it to the original position.

Pull out the lower die slide plate, take out the plastic cup, put it into the unsealed plastic cup, and carry out another cycle.

---

Cup sealing machine

The cup sealing machine is a kind of equipment that can seal the container mouth, which is suitable for the production of various yogurt, milk, soy milk, juice drinks, seasonings, jam and other products. It has the functions of automatic cup dropping, filling, sterilization, photoelectric tracking, sealing (capping), automatic core shearing, waste film recycling and so on. The whole machine has high degree of automation, good sealing strength, reasonable structure and high production efficiency, and is suitable for all kinds of imported and domestic composite drum packaging and sealing materials such as aluminum plastic, PP, PE and CPP. Made of all stainless steel, the rest is made of aluminum alloy, which has high mechanical beauty and stable operation, and truly meets the requirements of durability.