Is Bee Sugar Plum and Crisp Plum a variety

No

Difference between Crisp Plum and Bee Sugar Plum: Introduction to Bee Sugar Plum, Characteristics and properties: young trees are stronger and more upright, adult trees are more open, trees are taller, semi-circular head type, high budding rate, low branching rate, and long internodes; annual branches are brown on the sunny side, green on the shaded side, and perennial branches are grayish-brown; the flesh is fine and crisp, crisp and refreshing, and there is a lot of juice in the middle and taste is strong. It is thick and sweet, free from nucleus, with excellent quality.

Green crisp plum, April plum, (early): ripe in late June, not ripe before the bright green, ripe for slightly bright green, single fruit weight 1-2 two or so, the fruit surface has a small amount of fruit powder, taste crunchy, slag, away from the nucleus, taste sweet and sour taste, the market is sold for a high price, welcomed by consumers, all around the development.

Iron crutch Li and half cut Li is a person

Not the same, Iron crutch Li is one of the eight Immortals, half cut Li is from the Southern School of Uncle Sam novel "Tomb Raider Notes", the nine door Tidings (the old nine doors) one of the three doors on the ranking of the third. His real name is unknown. In a tomb raiding by his companions to break the legs sealed in an ancient tomb, lucky to escape after only half a life, since then ruthless and extremely suspicious. Especially after he healed, he found a few accomplices who harmed him at that time, broke their legs and dragged them one by one to the ancient tomb where they stayed at that time, and starved to death inside the tomb....

Is the red leaf plum and purple leaf plum a thing

Yes

Chinese name: red leaf plum

Alias: purple leaf plum

binomial: Prunus ceraifera cv. Pissardii

Boundary: Botanical kingdom

Phylum: Angiospermae

Ord. p>

Subclass: Rosaceae

Are wasps, wasps, and hornets one species?

Yes, hornets, scientifically known as wasps, commonly known as hornets and wasps, are very toxic, and the venom of their stinging needles contains phospholipase, hyaluronidase, and a protein known as antigen 5, which should be treated promptly after being stung by a hornet. The natural open-ended shape is characterized by ventilation and light penetration, high fruitfulness of the inner and lower branches, long life, and easy to manage. Double sparse happy shape tree structure is the first layer of the main branch 3, layer spacing 80 cm or so, the second layer of the main branch 2, above the drop head happy.

2, pruning

young trees

① plum tree natural happy shape: planting year in 40 ~ 60 cm from the ground cut stem. The first bud under the cut should face the wind direction (southwest), and the cut should be beveled. The top of the slant is slightly higher than the tip of the bud, and the bottom of the slant is flat or slightly higher than the base of the bud. In the spring of the second year in the drying year of the new branches issued by the selection of 3 ~ 4 branches distributed in all directions as the main branch (if not enough can be selected the next year). Angle and distance between the main branches and the figure as shown, if the branch angle is unreasonable, can be corrected by pulling or hanging branches. Thin out the overcrowded branches, and leave the branches that are not dense as auxiliary branches. According to the growth of each main branch appropriate short cut, cut off the full length of 1/4 ~ 1/3. the third year of spring pruning, in each of the main branches were selected 1 angle of open, strong growth of the branch as the main branch of the long branch, short cut, cut off the whole branch about 1/2, and in each of the main branch of the lower part of the selection of 1 ~ 2 outward growth of the branch as a side branch, short cut about 1/3. The main branch bearing 5 cm or less of twigs as much as possible to stay, cultivated into short fruiting branches or bouquet fruiting branches, medium and long fruiting branches appropriate short cut. In this way, after 3 to 4 years the shape of the tree has been basically determined, and then each year, the main and lateral branches of the extension branch pruning method is the same as the previous year.

② plum tree double sparse happy shape: this tree shape is suitable for strong growth, the tree is more upright varieties. The planting year stem height of 40 to 60 cm. The next spring, select the top growth potential of the upright branches for *** stem, and then in the main trunk to select 3 ~ 4 good angle branches for the first layer of the main branch, short cut 1 / 3 or so, the main branches and the main trunk angle of 50 to 60 °. Other more upright branches can be thinned out, short and medium branches should be retained as fruiting branches. The third year of spring pruning, in the previous year selected to stay on the main branches of the angle of open branches

branches for lateral and extension branches, and then in the center of the trunk of the selection of 2 ~ 3 main branches as the second layer, and the first layer of main branches staggered open, the two layers of the spacing of 50 ~ 60 cm, at the same time, will be the center of the trunk of the happy fall head. Other branches of the pruning method and the same natural happy shape. After 3~4 years can be shaped.

? plum tree seedling fruiting

The use of backbone branches often change the head of the method of controlling the size of the tree, the upper branches and peripheral branches should be a combination of thinning, retraction, that is, thinning and stay sparse, to go to the peak and stay strong, retained branches slow to not cut off, the next year and then retracted in the appropriate branching, to reduce peripheral foliage, to improve the inner chamber and the lower level of the light conditions, and moderate the upper part of the crown and the periphery of the growth potential, the result of the branch should be thinning weak and stay strong, old and stay new, planned and planned for the fruiting branch group. The fruiting branches should be thinned out and left strong, and the old should be left new, and they should be retracted and re-strengthened in planned phases and batches to control their density and length. Thinning too dense branches, cross branches, diseased branches and weak branches, to save nutrients, ventilation and light.

Are toads and frogs a species?

1. Compare skin and body color

Frogs have 2 longitudinal folds from the back of the eyes up to the base of the hind limbs, which are golden yellow or light brown. There is a light-colored longitudinal stripe in the center. The hind limbs have many horizontal rows of black markings. The back of the frog is brown or yellowish green and the ventral surface is white. Toads have rough skin and are densely covered with wart-like projections of varying sizes. The dorsal surface is dark brown, and the ventral surface is creamy yellow.

2. Observation of poisonous glands Toads have abundant poisonous glands, skin glands and post-auricular glands. Skin glands are distributed in the back of the carapace, where the epidermis is locally thickened into "warts". The postauricular glands are found on the side of the head above the eardrum. When the posterior gland is carefully punctured with a needle, a milky white toxic slurry flows out. Frogs do not have poison glands.

3. Observe the vocal sacs The male frog has a pair of vocal sacs behind the corners of the mouth, and the gas in the mouth presses into the vocal sacs to expand them into a ball, and the female frogs do not have vocal sacs. Female frogs do not have vocal sacs, while toads do not have vocal sacs in both sexes.

4. Comparison of teeth and tongue

Frogs have a row of tiny maxillary teeth on the edge of the upper jaw; there are also two rows of side-by-side transverse verrucous protuberances on the plastron at the top of the oral cavity, which are called plastron teeth. Toads, on the other hand, have no teeth in either the upper or lower jaw. Pull out the frog's tongue, the tip of its tongue is forked; while the toad's tongue is not forked.

5. Observe the connection between the ureters and the cloaca The two ureters of the frog are connected to the cloaca, and there are two openings on the cloacal wall; while the two ureters of the toad are first combined into a common ureter, and then enter the cloaca, and there is only one opening on the cloacal wall.

6. Observe the connection between the oviducts and the cloaca. The two oviducts of frogs are also connected to the cloaca separately, whereas the two oviducts of toads merge before they are connected to the cloaca.

7. Comparison of the shoulder girdle

In frogs, the two upper rostrum bones are closely connected in parallel without overlapping, and cannot be staggered, which is called the solid thoracic girdle, while the upper rostrum bones on both sides of the frog overlap with each other, and can be staggered, which is called the arc-thoracic girdle. In front of the inner end of the two clavicles of frogs, there is a rod-shaped scapulothoracic bone, and there is a semicircular cartilage in front of the scapulothoracic bone, which is the upper thoracic bone. And the toad is not these two bones.

8. Comparison of vertebrae The first seven vertebrae of the frog are cylindrical, the front end is concave and the back end is convex, which is called anterior concave, while the eighth vertebrae is biconcave; while the first eight vertebrae of the toad are anterior concave.

Toads have keratinized epidermis, so they are more drought-tolerant and can operate in dry environments far from water. Frogs and toads are not the same body color, but in different living environments are protected, and by the environmental impact of the great variation. The toad's jumping ability is much less than that of the frog, but the venom glands protect it to some extent from predators, and these are protective organs. Male frogs have a pair of vocal sacs, which are vocal ****ing sounders. Frog maxillary teeth are homomorphic teeth, these teeth have no chewing function, only to prevent small animals from slipping out of the role of the mouth. The presence or absence of the teeth and their implantation position, whether the tongue is forked or not, and the type of shoulder girdle and vertebrae are the basis for the classification of tailless amphibians. The difference in the manner in which the ureters and oviducts of frogs and toads are connected with the cloaca is often a difference in anatomy that is easily overlooked.

The planting prospects of the honeybush plum, the income is not big, honeybush plum planting technology

Plastic pruning

1, tree shape

The tree shape of the plum tree is often used in the shape of natural happy shape and two-layer sparse open-ended shape.

The natural open-ended shape is characterized by ventilation and light, high fruitfulness of the inner and lower branches, long life, and easy to manage.

Double sparse open-ended tree structure is the first layer of three main branches, layer spacing of about 80 centimeters, the second layer of two main branches, above the drop head happy.

2, pruning

young trees

① plum tree natural open-ended: planting the year in the ground 40 - 60 cm from the cut stem.

The first bud under the cut should be facing the wind direction (southwest), and the cut should be beveled.

The top of the slant is slightly higher than the tip of the bud, and the bottom of the slant is level with the base of the bud or slightly higher.

In the spring of the second year, the new branches of the year the stem is set to select 3 - 4 branches distributed around as the main branch (if not enough can be selected the next year).

The angle and distance between the main branches and as shown, if the angle of the branch is unreasonable, can be corrected by pulling or hanging branches.

Thinning out too dense branches, not dense branches stay as auxiliary branches.

According to the growth of the main branches of the appropriate short cut, cut off the full length of 1/4 - 1/3.

The third year of spring pruning, in each of the main branches of the main branches of the angle of the open, strong growth of the branch as the main branch of the long branch, short cut, cut off the full branch of 1/2 or so, and in the lower part of each main branch to choose 1 - 2 branches of the main branch. In the lower part of each main branch, select 1--2 branches growing outward as side branches, and cut off about 1/3.

The main branch bearing 5 cm or less of twigs as much as possible to stay, cultivated into short fruiting branches or bouquet-shaped fruiting branches, medium and long fruiting branches appropriate short cut.

In this way, after 3 - 4 years, the shape of the tree has been basically determined, and then each year the main and lateral branches of the extension branch pruning method is the same as the previous year.

② plum tree double sparse happy shape: this tree shape is suitable for strong growth, the tree is more upright varieties.

The planting year stem height 40 - 60 cm.

In the spring of the second year, select the top growth potential of the upright branches for *** stem, and then in the main trunk of the selection of 3 - 4 good angle of the branches for the first layer of the main branches, shorten the cut 1/3 or so, the angle of the main branches and the main trunk 50 - 60 °.

Other more upright branches can be thinned out, short and medium branches should be retained as fruiting branches.

When pruning in the spring of the third year, the main branches selected in the previous year to select the angle of the open branches

branches for side branches and extension branches, and then in the center of the trunk of the selection of 2 - 3 main branches as the second layer, and the first layer of the main branches staggered, the spacing between the two layers of 50 - 60 cm, at the same time, the center of the trunk as a second layer, and the first layer of the main branches staggered, the distance between the two layers of 50 - 60 cm. The two layers are spaced 50-60 cm apart, and at the same time, the center stem will be happy to drop the head.

Other branches of the pruning method and the same natural happy shape.

After 3 - 4 years can be formed.

plum seedling fruiting

The use of backbone branches often change the head of the method to control the size of the tree, the upper branches and peripheral branches should be a combination of thinning, retraction, that is, thinning and sparse, to Wang stay strong, retained branches slow to not cut off the next year and then in the appropriate branch retraction, to reduce peripheral foliage, to improve the inner chamber and the lower layer of the light conditions, and moderate the growth potential of the upper part of the crown and the periphery of the fruit-bearing branches. The group should be thinning weak to stay strong, to old to stay new, planned phases, batches of retraction and re-strengthening, control its density and length.

Remove the overcrowded branches, cross branches, diseased and weak branches, etc., in order to save nutrients, ventilation and light.

Plastic pruning 1, tree shape The tree shape of the plum tree often adopts the natural happy shape and double sparse happy shape. The natural happy shape is characterized by ventilation and light, the inner and lower branches of the high fruitfulness, long life, easy to manage. Double sparse open-ended tree structure is the first layer of the main branch 3, layer spacing 80 cm or so, the second layer of the main branch 2, above the drop head happy.

Bee sugar plum technology

plum tree is generally divided into fall planting and spring planting. Autumn planting is carried out after the fall of leaves until the soil freezes. The advantage is that the wound can be healed that year and send out fibrous roots, the next spring can be rooted in time, that is, the slow period is short, the survival rate is high, good growth. In the fall more rain, spring drought areas, it is appropriate to fall planting, but should pay attention to the winter before the arrival of cold work, to avoid the occurrence of winter drying and frost damage. Spring planting is in the soil after thawing to seedlings sprouting before planting, there are irrigation conditions in the area of spring planting is best. In addition, northeast, northwest, northern China and Inner Mongolia and other regions, due to the short frost-free period, winter cold, to spring planting the best. Can take the summer and fall digging planting pit, accumulation of rain and snow, spring planting method, not only the plum tree survival rate is high, but also save the new planting of young trees to prevent cold work. Normal year in early February began to sprout, early March bloom, flowering period of about 15 days, fruit ripening in late June, fruit fertility period of about 125 days; late November began to fall leaves, the annual fertility period of about 280 days. Suitable planting area: Guizhou Province, below 1200 meters above sea level planting area, distribution range, because the variety was just discovered, the distribution range is relatively small, mainly in the area of Zhenfeng County, Guizhou Province, due to the strong support of the local ***, the variety has been a great promotion, the future distribution range will be more extensive.