Method 1:

You can use the bullseye white glue, with contact lens protection solution, hand sanitizer to make the foaming glue, so that the production of foaming glue viscosity is good, the following is the production of specific steps:

Tools needed: bullseye white glue, contact lens protection solution, hand sanitizer, spoon.

1, first of all, in a small bowl poured into the bullhead white glue, bullhead white glue is the main body of the foaming glue.

2, add contact lens protection solution to lubricate.

3, add hand sanitizer, also plays a lubricating role.

4. Use a spoon to stir the above mixture together.

5, try to stir for a while, the more evenly mixed, the better the results.

6, when poking a few small holes, will not be immediately recovered, on behalf of the foaming gel is ready.

7, blistering glue is done, test the effect, visible a long pull, the effect can be.

Method 2:

Materials needed: water, glue, glycerin, make-up remover, fairy water, appropriate amount

Method of production is as follows:

1, ready to water and glue, the ratio of the two 1:1 (the glue can add a little coloring). Glue can add a little coloring).

2. Pour the prepared ingredients into a bowl.

3. Pour in a little makeup remover (to prevent it from sticking to your hands).

4: Use a tool to mix the ingredients in the bowl well.

5, add a proper amount of glycerin during the mixing process (it prevents the made lathering gel from becoming brittle).

6, add the fairy water in small amounts several times until the solution is no longer dilute.

7, take out the thickened block and keep stretching it with both hands.

8. Interlock and knead until it is no longer sticky.

9, foaming glue into a complete shape, it means the production is successful.