1, cocoon drying: then the cocoon drying (kill pupa), at the same time make the silk inside the water can be removed, the silk is not easy to turn yellow.

2, stripping cocoon cotton: through the drum in accordance with a certain ratio of rotation will be adsorbed on the drum silk fiber, silk and pupae and other staple fibers are separated. Remove the cocoon cocoon coat (cocoon coat fine and fragile, silk strands messy, can not be used for beating cotton).

3, the first wash: the sheep machine to take down the silk generally contain pupa skin and other impurities, through the rough wash to remove these impurities.

4, cooking silk: the main purpose of cooking silk is the silk wool in the silk glue, chrysalis oil and other impurities and silk fibers separated out.

5, fine washing PH adjustment: the separation of silk glue, chrysalis oil after the silk washing, so that softeners, PH regulators can better enter the silk. Silk is alkaline, in order to reach the human body to accept the range, the need for PH value neutralization.

6, selection of silk (artificial de-banding): the production process of silk, will contain some of the bands, should be removed. If the removal of thorns is not clean, the case of light will appear, if a small amount is normal, the amount of more than that means that the quality of silk is not very good.

7, baking silk: the production of silk in the high temperature baking, can kill the germs in the silk. The water content will be controlled within a manageable range.

8, drawing: the use of traditional hand-drawing process, the semi-finished silk loose, elongated, silk layer by layer stacked, criss-cross, layer by layer compression.