The peeling machine is suitable for large, medium and small paper mills, pulp mills, wood chip mills, wood processing plants, forestry plants, lumber yards, artificial board factories (such as plywood factories, medium density fiberboard factories, etc.) When logging forests in the southern forest areas of my country (Guangdong, Guangxi, Fujian, Sichuan, Hainan, etc.), the bark must be peeled off first. The bark peeling machine uses the unique force generated by the rotor with peeling teeth. With the wood section, there is constant friction, impact, and extrusion between the wood section and the bin, and the bark is quickly separated, achieving the effect of a high-rotor peeling machine.

Features of the peeling machine:

1. It adopts a four-sided blade tool, which is easy to use and low in cost.

2. The cutterhead pressure regulation is controlled by hydraulic pressure, with advanced structure and reliable performance.

3. The feeding mechanism adopts stepless speed change, which has good peeling effect on frozen wood, bent wood, eucalyptus, oak, elm and other difficult-to-bark tree species.

4. High peeling clarity, high productivity and little wood damage.

The working principle of the peeling machine:

1. The peeling machine adopts an open silo, which can feed materials from one end and discharge materials from the other end, which overcomes the existing drum peeling machine. The shortcomings of the power outage feeding and discharging, segmented working method, and high working efficiency.

2. Due to the impact of the teeth on the wood sections of the wood peeling machine, not only the wood sections make circular motions in the casing, but also rotate around themselves. Therefore, the wood peeling machine has high efficiency, such as eucalyptus, poplar, etc. Tree species that are difficult to peel have better peeling effects, with a clarity of over 95.

3. The wood peeling machine has strong adaptability to wood and can peel wood sections of different tree species, diameters, lengths and shapes. Due to the rotational movement and irregular beating of the wood sections , so the concave part of the curved wooden section can also be in good contact with the peeling teeth. Therefore, the stripping rate of curved logs is much higher than that of other roller types.

4. Because the huge casing of the wood peeling machine is fixed, it consumes little energy, has a low failure rate, has a small maintenance workload, and has much lower vibration and noise than the roller peeling machine. The peeling machine can be produced when it lands on the ground, and does not even need to install a base, making it easy to use.