1. First, disassemble the housing of the slide rail. There may be several screws that need to be removed;

2. Use a wrench or hexagonal wrench to disassemble the slide rail clamping without magnets. device and prepare to disassemble the slide rail;

3. If fasteners or tools are used on the slide rail, remove the fastener first;

4. Use special traction fasteners Pull the slide rail to the disassembled state;

5. After removing the supporting slide rail, use special traction fasteners to pull the slide rail to the disassembled state;

6. Remove Bearings and pulleys, try to be careful not to damage the slide rail;

7. Place the disassembled slide rail on the flat ground, and use a steel ruler to measure its width, length, thickness and other dimensions;< /p>

8. Put it into the cleaning machine to clean the surface of the slide rail, and clean the surface of the slide rail into a state that can continue driving;

9. After installation, it is recommended to reinstall the shell; < /p>

10. Put on the slide rail and complete the fixation. Fix the slide rail on the wall or gasket, and the installation is complete.

One million car purchase subsidies