In addition to the toilet is a bathroom essential household items, it is a family contact the most intimate place. A little inattention will breed bacteria, affecting the health of the whole family. In addition to regular cleaning of the toilet, in fact, this behavior is not right. Most people after using the toilet, are habitually open the toilet lid, only a very small number of people, will put down the toilet lid. Speaking of which, then the toilet lid in the end cover or not cover good?
First, the toilet lid in the end cover or open good?
Nowadays, most people use the toilet directly after flushing, and then let the toilet cover has been open. One is to take into account the odor after the toilet is too big, open the toilet cover is convenient to ventilate the air. Secondly, some people will find it troublesome to put down the lid after using the toilet, and then also lift it, always touch the toilet lid with your hands, which is also unhygienic. Therefore, it also leads to the majority of families toilet cover is always open.
But the toilet lid has been open, in fact, is very unhealthy. According to New York University's Dr. Philip Tylenol, a professor at the University of New York. According to Professor Philip Tylenol of New York University, if the toilet lid is open when flushing, the instant cyclone inside the toilet can carry germs and microbes up to 6 meters into the air and suspend them for up to a few.
And now most of the family toothbrush, mouthwash cups, towels and toilet **** in a room, which will lead to bacterial contamination, health is particularly unfavorable.
Second, Toilet Selection Techniques
Stroke: Observe the gloss of the toilet seat
The higher the gloss of the product, the higher the denseness, the easier it is to clean and sanitary. This is because the quality of porcelain and the life of the toilet has a direct relationship, the higher the firing temperature the more uniform, the better the porcelain.
The second trick: see whether the glaze is uniform
Consumers can ask the store, whether the drain is glazed or not, or even reach into the drain with your hand and touch the return bay whether there is glaze. Hanging dirt is the culprit of poor glaze, customers can use their hands to touch, qualified glaze must be a delicate feel. Consumers can be a little picky, touch the glaze corner place (corner of the corner of the sun), glaze with a very thin, then, in the corner of the place will not be uniform, will be exposed to the bottom, it will be very rough to the touch.
The third trick: knock on the surface to listen to the raw
When choosing a toilet, you have to judge whether the product is cracked internally, or whether the product is burned! High-temperature firing toilet low water absorption, not easy to suck in sewage, odor. Medium and low grade toilet seat water absorption is very high, easy to odor and very difficult to clean, over time, there will be cracks and leaks. So how to judge whether the toilet is intact? We choose the toilet is, you can use your hand to gently knock the toilet, if the sound is hoarse, not crisp and loud, it is likely that there is an internal crack, or the product is not cooked.
The fourth trick: the weight of the toilet weighs a hefty
Ordinary toilet weighs about 50 pounds, a good toilet about 100 pounds. High-grade toilet because of the high temperature when firing, to the level of all ceramic, so weigh in the hand will have a heavy feeling. But in the purchase, we can not lift the toilet to determine the weight, this time, we can pick up the tank cover with both hands, can weigh it to determine the weight of the entire toilet.
Fifth trick: toilet flushing
Toilet flush clean or not and its flushing method has a direct relationship. Now the domestic toilet, there are two main ways of flushing, direct and siphon. Straight flush type toilet use flushing water when flushing its own gravity, the dirt from the toilet in the elbow in order to achieve sewage, the advantage of strong sewage capacity; and siphon type toilet is the use of flushing toilet sewage pipe in the siphon force, the dirt from the toilet in the elbow to achieve sewage purpose, the advantage of flushing to avoid splashing, the cylinder rinsing effect is cleaner.
Sixth move: the toilet's water consumption
There are two ways to save water, one is to save water consumption, one is to save water through the reuse of waste water. Water-saving toilet and ordinary toilet function, must be both water, maintain the function of washing and transportation of excreta function, the current market with a water-saving slogan but the product technology and the actual effect is not as good as a few of the products, buy need to pay attention to.
Seventh: test the water-saving performance
Many products on the market claim to use the 6-liter water-saving design, but in fact, it is difficult for ordinary consumers to identify the actual effect, it is recommended that you buy a well-known brand products. Whether the toilet is water-saving affected by two aspects.
Reminder: when consumers buy a toilet, you need to know in advance the bathroom toilet location of the pit distance (toilet drain center and the distance from the wall), a large number of products on the market for the 300 mm and 400 mm pit distance, consumers need to buy a toilet when the data provided by the merchants, to avoid model mismatch.
In addition, many people may not know, the more serious pollution is the toilet bowl ring, so focus on cleaning, every few days you have to use diluted household disinfectant wipe, keep the toilet bowl ring clean. In short, the reason why the toilet is designed with a lid is to prevent odor and eliminate bacteria. So after using the toilet smoothly cover the lid, not only a good habit, or the embodiment of the responsibility of the family.