Rebound steel ball slide rail and hidden slide rail are installed in the upper cabinet, so it is necessary to reserve a certain space for the spring to reach a complete rebound path. Moreover, it is best to tilt the cabinet slightly downward, and the rebound effect of the drawer is more obvious by the downward action of gravity.
Extended data:
Precautions for drawer use:
1, the drawer is stuck or too tight, indicating that the gap between installation dimensions is not enough, and the gap between furniture factories is loose 1 to 2mm. Check whether the matching screws are consistent in size.
2. The derailment of the track diagram indicates that the installation size gap is too large, which requires the furniture factory to reduce the installation size.
3. If the drawer is uneven, first check whether the positions of the mounting holes on both sides are consistent, and then check whether the drawing angle is 90 degrees.
4. The installation dimensions of the upper and lower drawer guide rails are the same, but they cannot be interchanged, indicating that the positions of the two drawer surfaces are inconsistent.
5. The phenomenon of edge painting shows that the installation dimension on the right side is not calculated according to the standard12.5 mm. ..
Baidu encyclopedia-drawer