The method to make homemade foaming gel from clay is as follows:

Add a clay inside a container and add water to melt it. Once it has melted, add the coloring of your favorite color. Add hand sanitizer and give it a good mix. Then add continue to foam and stir to shape, if not enough add again. Then keep stirring and stirring and stirring, it will take a while. After mixing and molding you can get on it, so that the foaming gel is ready.

First add a clay inside the container, and then add water to melt. Once it has melted, add the coloring of your favorite color. Add the usual hand sanitizer, mix well, then add continue to foam and stir to shape, if not enough, add again. Then keep stirring, it takes a while, stirring after molding can be on the hand, so that the foaming gel is done successfully.

First of all, we have to prepare the materials: a package of clay, two small containers, soap, detergent, stirring rod a, water. In a small container add some soap foam, add some detergent, add some water and stir out the foam. Wash the clay in cold water, stirring as you go, until it is slightly sticky, then pour off the water.

Add a little bit of the soapy detergent water to the clay, stirring and kneading, plus a few times. Then stir and knead until it is not sticky at all, and capricious enough when the foaming gel is ready.

Buy a bottle of clear glue, a cheap one will do. And a bag of laundry detergent, they should all have laundry detergent. Then pour the transparent glue into the container, and then add the wave of Qi (do not use the wave of Qi can choose Qiqiang, Tide, in addition to these three, I only know to add this one of the three, you can not use the molding water) laundry detergent, stir a little bit, at home a little detergent, in the stirring stirring until the molding, the foaming glue is ready.