Introduction: usually in the use of rice cooker when we pay more attention to the use of our method is actually able to extend the life of the rice cooker Oh, rice cooker in the use of the process is not will not appear fault, we usually in the use of rice cooker should also have encountered their own rice cooker malfunction such a situation right, usually we encountered the rice cooker malfunction when the Usually we feel helpless when encountering a malfunctioning rice cooker, but if you know some of the rice cooker repair methods, then you do not have to worry about encountering such a situation do not know how to do, how to repair the rice cooker? Come and see the rice cooker repair tutorials that I have provided for you.

Trouble 1: the rice cooker indicator light does not light up, the heating plate can be hot

Reason: the indicator light and the buck resistor wiring is loose or damaged.

Repair method: check the welded wiring or replace the indicator or buck resistor.

Trouble two: rice cooker indicator light does not light, the heating plate is not hot

Reason:

1, not connected to the power supply.

2, key switch or warmer moving, static contacts can not be closed.

Maintenance method:

1, check the switch, plug, socket, fuse, power cord is intact.

2, check and adjust the key switch and insulator contacts, spring plate, and make it start flexible, good contact.

Trouble three: the heating plate is not hot

Reason:

1, the over-temperature protector broken circuit.

2, the heating disk is damaged.

3, the heating plate lead rod lug oxidation rust, poor contact.

4, the heating disk connecting wire off, the power is not available.

Repair method:

1, it will be 'overtemperature protector replacement.

2, replace its heating disk.

3, oxidized rust, remove its rusted parts, and at the same time re-connect it firmly.

4, wire off, it will be re-welded.

Trouble 4: Cooking rice is easy to cook rice scorched

Reason:

1, the rice cooker warmer temperature adjustment is too high.

2, the insulation between the two contacts of the switch is damaged or punctured.

3, the support porcelain column of the metal plate on the warmer falls off or is damaged.

4. The movable and static contacts of the rice cooker warmer are fused and glued together, and can not be disconnected from the power supply.

Repair method:

1, adjust or replace the rice cooker warmer.

2, the rice cooker switch parts replacement.

3, re-install the porcelain column of the rice cooker.

4, pry open the movable and static contacts that are stuck together, and repair and replace them.

Well, after I briefly showed you the way to repair the rice cooker above, we finally came to understand what are the tricks of the rice cooker.

1, before steaming rice, it is best to wash the rice will be soaked in water for 15 minutes before steaming, which can greatly shorten the cooking time, while cooking rice will be particularly fragrant Oh.

2, in the use of rice cooker, it is best not to use the rice cooker as a kettle to use, because the same power of the rice cooker and kettle water, rice cooker to use the time than the kettle to use a longer time.

3, in the use of rice cooker, it is best to avoid the peak period of electricity, so that can effectively save power, while the rice cooking will be more rapid.

4, the use of the rice cooker, you need to ensure that the inner pot and the outer pot between the clean, because the rice cooker used for a long time while there is no timely cleaning, it will make the bottom of the pot to gather a layer of oxides, affecting the use of the rice cooker.